lkml.org 
[lkml]   [2008]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 33/36] Allow port type to specify bugs that are not probed for.
Date
Add a bugs field to the serial8250_config and propagate it to the
port's bugs field when the port is registered and configured.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
---
drivers/serial/8250.c | 2 ++
drivers/serial/8250.h | 1 +
2 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 9d16abb..474ab89 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1212,6 +1212,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
up->port.fifosize = uart_config[up->port.type].fifo_size;
up->capabilities = uart_config[up->port.type].flags;
up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
+ up->bugs |= uart_config[up->port.type].bugs;

if (up->port.type == PORT_UNKNOWN)
goto out;
@@ -3062,6 +3063,7 @@ int serial8250_register_port(struct uart_port *port)
uart->port.fifosize = uart_config[port->type].fifo_size;
uart->capabilities = uart_config[port->type].flags;
uart->tx_loadsz = uart_config[port->type].tx_loadsz;
+ uart->bugs = uart_config[port->type].bugs;
}

set_io_fns_from_upio(&uart->port);
diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
index 5202603..c9b3002 100644
--- a/drivers/serial/8250.h
+++ b/drivers/serial/8250.h
@@ -34,6 +34,7 @@ struct serial8250_config {
const char *name;
unsigned short fifo_size;
unsigned short tx_loadsz;
+ unsigned short bugs;
unsigned char fcr;
unsigned int flags;
};
--
1.5.6.5


\
 
 \ /
  Last update: 2008-10-28 01:07    [W:0.032 / U:1.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site