lkml.org 
[lkml]   [2008]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 40/85] ACPI suspend: Always use the 32-bit waking vector
From: Rafael J. Wysocki <rjw@sisk.pl>

According to the ACPI specification 2.0c and later, the 64-bit waking vector
should be cleared and the 32-bit waking vector should be used, unless we want
the wake-up code to be called by the BIOS in Protected Mode. Moreover, some
systems (for example HP dv5-1004nr) are known to fail to resume if the 64-bit
waking vector is used. Therefore, modify the code to clear the 64-bit waking
vector, for FACS version 1 or greater, and set the 32-bit one before suspend.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
---
drivers/acpi/hardware/hwsleep.c | 39 ++++++++++++---------------------------
1 files changed, 12 insertions(+), 27 deletions(-)

diff --git a/drivers/acpi/hardware/hwsleep.c b/drivers/acpi/hardware/hwsleep.c
index 130a44b..25dccdf 100644
--- a/drivers/acpi/hardware/hwsleep.c
+++ b/drivers/acpi/hardware/hwsleep.c
@@ -78,19 +78,17 @@ acpi_set_firmware_waking_vector(acpi_physical_address physical_address)
return_ACPI_STATUS(status);
}

- /* Set the vector */
+ /*
+ * According to the ACPI specification 2.0c and later, the 64-bit
+ * waking vector should be cleared and the 32-bit waking vector should
+ * be used, unless we want the wake-up code to be called by the BIOS in
+ * Protected Mode. Some systems (for example HP dv5-1004nr) are known
+ * to fail to resume if the 64-bit vector is used.
+ */
+ if (facs->version >= 1)
+ facs->xfirmware_waking_vector = 0;

- if ((facs->length < 32) || (!(facs->xfirmware_waking_vector))) {
- /*
- * ACPI 1.0 FACS or short table or optional X_ field is zero
- */
- facs->firmware_waking_vector = (u32) physical_address;
- } else {
- /*
- * ACPI 2.0 FACS with valid X_ field
- */
- facs->xfirmware_waking_vector = physical_address;
- }
+ facs->firmware_waking_vector = (u32)physical_address;

return_ACPI_STATUS(AE_OK);
}
@@ -134,20 +132,7 @@ acpi_get_firmware_waking_vector(acpi_physical_address * physical_address)
}

/* Get the vector */
-
- if ((facs->length < 32) || (!(facs->xfirmware_waking_vector))) {
- /*
- * ACPI 1.0 FACS or short table or optional X_ field is zero
- */
- *physical_address =
- (acpi_physical_address) facs->firmware_waking_vector;
- } else {
- /*
- * ACPI 2.0 FACS with valid X_ field
- */
- *physical_address =
- (acpi_physical_address) facs->xfirmware_waking_vector;
- }
+ *physical_address = (acpi_physical_address)facs->firmware_waking_vector;

return_ACPI_STATUS(AE_OK);
}
--
1.5.5.1


\
 
 \ /
  Last update: 2008-10-11 08:55    [W:0.298 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site