lkml.org 
[lkml]   [2008]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Problem with ata layer in 2.6.24
Gene Heskett writes:
> On Tuesday 29 January 2008, Alan Cox wrote:
> >> As slight change here, I was going to use the same .config as 2.6.24-rc8,
> >> but just discovered that neither rc8 nor final is finding the drivers for
> >> my
> >
> >If it is not finding a driver that is nothing to do with libata. It means
> >it's not being loaded by the distribution, or the distribution kernel is
> >too old (2.6.22) for the hardware - in which case see the Fedora respins
> >which are on 2.6.23.something right now.
> >
> >Alan
>
> Home built kernel Alan. But you are as good as anyone to tell me what I
> need to turn on in order for this dvdwriter to be enabled:
> [ 28.862478] ata2.00: ATAPI: LITE-ON DVDRW SHM-165H6S, HS06, max UDMA/66
> ....
> [ 28.908647] ata2.00: limited to UDMA/33 due to 40-wire cable
> [ 29.081253] ata2.00: configured for UDMA/33
> ....
> it has had several 80 wire cables tried, hasn't fixed this, and does not
> seem to effect its operation when it does work.
> ....
> [ 29.132405] scsi 1:0:0:0: CD-ROM LITE-ON DVDRW SHM-165H6S HS06 PQ: 0 ANSI: 5
> ....
> [ 43.450795] scsi 1:0:0:0: Attached scsi generic sg1 type 5
> -------
> No further mention of it in dmesg, and k3b cannot find the drive at any
> /dev/sgX address.
>
> .config attached, what else do I need to turn on?

...

> # CONFIG_BLK_DEV_SR is not set

For starters, enable CONFIG_BLK_DEV_SR.


\
 
 \ /
  Last update: 2008-01-29 17:53    [W:1.243 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site