lkml.org 
[lkml]   [2008]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: dl2k stopped working on 2.6.24
> I've been playing with ethtools and got it to work at 100FD by setting it
> manually, but if afterwards I set it to auto it again goes 1000 HD and thus
> not working again.

I have changed my gigabit switch for a 100Mb wrt and the dl2k sets the link
right at 100FD and works much better than when using it at the forced 100FD
on the gigabit switch, in this last configuration the card was strugling a
lot, with tranfers under the megabyte/s.

I don't believe this is anything on my side as the e1000 cards and Nforce4
forcedeth I have all work ok at 1000FD with 2.4.24. Besides, the dl2k works
ok on the same environment with 2.4.23.

If there is a better list or anybody to contact about the dl2k so that I can
send this info please let me know.

As I said on my previous mail, if any other info is needed or testing any
special stuff, don't hesitate to ask.

Regards...
--
Manty/BestiaTester -> http://manty.net


\
 
 \ /
  Last update: 2008-01-29 00:37    [W:0.088 / U:1.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site