Messages in this thread | | | From | Kumar Gala <> | Subject | Re: [PATCHv3 2.6.25] i2c: adds support for i2c bus on Freescale CPM1/CPM2 controllers | Date | Mon, 28 Jan 2008 11:01:46 -0600 |
| |
On Jan 25, 2008, at 11:11 AM, Jochen Friedrich wrote:
> Using the port of 2.4 code from Vitaly Bordug <vitb@kernel.crashing.org > > > and the actual algorithm used by the i2c driver of the DBox code on > cvs.tuxboc.org from Tmbinc, Gillem (htoa@gmx.net). Renamed i2c-rpx.c > and > i2c-algo-8xx.c to i2c-cpm.c and converted the driver to an > of_platform_driver. > > Signed-off-by: Jochen Friedrich <jochen@scram.de> > --- > arch/powerpc/boot/dts/mpc8272ads.dts | 10 + > arch/powerpc/boot/dts/mpc866ads.dts | 10 + > arch/powerpc/boot/dts/mpc885ads.dts | 10 + > arch/powerpc/platforms/8xx/mpc885ads_setup.c | 5 + > drivers/i2c/busses/Kconfig | 10 + > drivers/i2c/busses/Makefile | 1 + > drivers/i2c/busses/i2c-cpm.c | 759 +++++++++++++++++ > +++++++++ > 7 files changed, 805 insertions(+), 0 deletions(-)
really should be split in two patches. The drivers/i2c/* should go via the i2c maintainers. the arch/powerpc via me or vitaly.
- k
| |