lkml.org 
[lkml]   [2008]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: lxfb is not changing modes, no errors/information printing out
On 27/01/08 13:45 -0500, Andrew Paprocki wrote:
> Using 2.6.24, I can't get my Geode LX (LX800 CPU) to boot in anything
> other than the default 80x25 console even though lxfb appears to be
> loading normally. This device doesn't work with the VESA fb either
> when I request "vga=0x31a". All the other boards I have display a
> 1280x1024 console on my monitor. Are my kernel parameters wrong in
> some way? I tried "video=lxfb:<mode>" with and without "vga=0x31a".
> The driver is compiled into the kernel -- I am not using modules.

Can you change the mode after you have booted with 'fbset'?

> Also, a side note.. blanking on this display doesn't seem to work
> properly. When the screen would normally blank after a timeout, a thin
> ~20px width vertical black strip appears on the left-hand side of the
> screen, but the rest of the display area remains showing whatever
> contents were on the screen when the blank was triggered. Hitting a
> key goes back to displaying the current fb contents like you would
> expect.

Thanks for reporting that - thats a known bug, I'll send a patch to fix it.

Jordan

--
Jordan Crouse
Systems Software Development Engineer
Advanced Micro Devices, Inc.




\
 
 \ /
  Last update: 2008-01-27 20:29    [W:0.074 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site