lkml.org 
[lkml]   [2008]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Q: linux failed to execute /init?
On Jan 25, 2008 3:02 PM, Jan Engelhardt <jengelh@computergmbh.de> wrote:
>
>
> On Jan 25 2008 14:39, Jack Harvard wrote:
> >> On Jan 25 2008 13:40, Jack Harvard wrote:
> >> >Hi,
> >> >
> >> >I'm trying to boot Linux, but the /init process failed. Here is the
> >> >info:
> >> >
> >> >=FF<6>/init exit code: -14
> >> >/init exit code: -14
> >> ><4>Failed to execute /init
> >> >Failed to execute /init
> >> > <6>/sbin/init exit code: -14
> >> >
> >> >Just wondering what do those different exit codes mean?
> >>
> >> asm-generic/errno-base.h:#define EFAULT 14 /* Bad address */
> >>
> >
> >Also, before the init process hung up and printed out /init exit code:
> >-14, it printed out the following symbol
> >ÿ
> >Which doesn't make any sense to me, just wondering what could have
> >caused this? it's unlikely due to baud rate and printed out something
> >unreadable.
>
> ÿ is 255. While this could indicate a serial transmission error (my
> guess: bad timing), printing -14 repeatedly certainly does not.
> Is the ÿ reproducable, does it happen every time?
>

This is reproduceable and it happens every time. IMHO, I also suspect
this could be caused by some obscure timing issues, as the kernel is
booting up from an FPGA-prototyped SoC, the same Linux image was
running fine on a previous build of FPGA-prototyped SoC, but it's
coming across this /init failed problem repeatedly on the currently
running newly built bit file.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2008-01-25 16:37    [W:0.038 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site