lkml.org 
[lkml]   [2008]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject-mm: pnp-do-not-stop-start-devices-in-suspend-resume-path.patch breaks resuming isapnp cards
Hi Andrew.

pnp-do-not-stop-start-devices-in-suspend-resume-path.patch in current -mm
breaks resuming isapnp cards from hibernation. They need the pnp_start_dev
to enable the device again after hibernation.

They don't really need the pnp_stop_dev() which the above mentioned patch
also removes but with the pnp_start_dev() restored it seems pnp_stop_dev()
should also stay. Bjorn Helgaas should decide -- currently the patch as you
have it breaks drivers though. Could you drop it?

Then, if so and after you do that, could you apply the attached? That's also
needed to resume (ALSA) ISA-PnP cards from hibernation due to the
RES_DO_NOT_CHANGE test triggering for ALSA drivers and the pnp_start_dev()
still not happening. More in the changelog...

On 12-01-08 20:08, Rafael J. Wysocki wrote:

> On Saturday, 12 of January 2008, Rene Herman wrote:

>> It seems all PnP drivers would need to stick a pnp_start_dev in their resume
>> method
>
> Yes.
>
>> then which means it really belongs in core.
>
> Yes, if practical.
>
>> One important point where PnP and PCI differ is that PnP allows to change the
>> resources on a protocol level and I don't see how it could ever not be
>> necessary to restore the state a user may have set if power has been
>> removed. Hibernate is just that, isn't it?
>
> Basically, yes, it is.

Rene.

commit 7d16e8b3e7739599d32c8006f9e84fadb86b8296
Author: Rene Herman <rene.herman@gmail.com>
Date: Sat Jan 12 00:00:35 2008 +0100

PNP: do not test PNP_DRIVER_RES_DO_NOT_CHANGE on suspend/resume

The PNP_DRIVER_RES_DO_NOT_CHANGE flag is meant to signify that
the PNP core should not change resources for the device -- not
that it shouldn't disable/enable the device on suspend/resume.

ALSA ISAPnP drivers set PNP_DRIVER_RES_DO_NOT_CHANAGE (0x0001)
through setting PNP_DRIVER_RES_DISABLE (0x0003). The latter
including the former may in itself be considered rather
unexpected but doesn't change that suspend/resume wouldn't seem
to have any business testing the flag.

As reported by Ondrej Zary for snd-cs4236, ALSA driven ISAPnP
cards don't survive swsusp hibernation with the resume skipping
setting the resources due to testing the flag -- the same test
in the suspend path isn't enough to keep hibernation from
disabling the card it seems.

These tests were added (in 2005) by Piere Ossman in commit
68094e3251a664ee1389fcf179497237cbf78331, "alsa: Improved PnP
suspend support" who doesn't remember why. This deletes them.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>

diff --git a/drivers/pnp/driver.c b/drivers/pnp/driver.c
index a262762..12a1645 100644
--- a/drivers/pnp/driver.c
+++ b/drivers/pnp/driver.c
@@ -161,8 +161,7 @@ static int pnp_bus_suspend(struct device *dev, pm_message_t state)
return error;
}

- if (!(pnp_drv->flags & PNP_DRIVER_RES_DO_NOT_CHANGE) &&
- pnp_can_disable(pnp_dev)) {
+ if (pnp_can_disable(pnp_dev)) {
error = pnp_stop_dev(pnp_dev);
if (error)
return error;
@@ -185,14 +184,17 @@ static int pnp_bus_resume(struct device *dev)
if (pnp_dev->protocol && pnp_dev->protocol->resume)
pnp_dev->protocol->resume(pnp_dev);

- if (!(pnp_drv->flags & PNP_DRIVER_RES_DO_NOT_CHANGE)) {
+ if (pnp_can_write(pnp_dev)) {
error = pnp_start_dev(pnp_dev);
if (error)
return error;
}

- if (pnp_drv->resume)
- return pnp_drv->resume(pnp_dev);
+ if (pnp_drv->resume) {
+ error = pnp_drv->resume(pnp_dev);
+ if (error)
+ return error;
+ }

return 0;
}
\
 
 \ /
  Last update: 2008-01-12 21:13    [W:0.097 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site