lkml.org 
[lkml]   [2008]   [Jan]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH linux-acpi] Correct wakeup set error and append a new column PCI ID
From
Date
On Wed, 2008-01-02 at 00:20 +0100, Pavel Machek wrote:
> Hi!
>
> > /proc/acpi/wakeup is also case-sensitive, case-insensitive is better.
>
> Why?
A user uses device bus id like 'C093' to enable or disable wakeup of the
device, for example

echo "C093" > /proc/acpi/wakeup

but i think "c093" should also be ok. i.e.

"echo 'c093' > /proc/acpi/wakeup" should have the same result as "echo
'C093' > /proc/acpi/wakeup".

That is to say, it should be case-insensitive.
>
> > In addtion, this patch appends a new column 'PCI ID' to /proc/acpi/wakeup
> > , the user can use it to get the corresponding device name very
> > conveniently because PCI ID is a unique identifier and platform-independent.
>
> Userland interface change...?
Not at all, i didn't find any userland application
assumes /proc/acpi/wakeup must be that kind of format.

In fact, /proc output is always changing. :-)
>
> Maybe this file should be left for compatibility and we should present
> something reasonable in /sys? Can't you already get PCI ID from sysfs
> node?
PCI ID can be gotten from sysfs, but it is a unique identifier for a
device, a user can get device name from /usr/share/hwdata/pci.ids in any
dstribution by PCI ID, he/she is unnecessary to use bus number to get
device name, bus number is platform-specific, but PCI ID is
platform-independent.

> Pavel
>
> > [root@localhost ~]# cat /proc/acpi/wakeup
> > Device S-state Status Sysfs node
> > C093 S5 disabled pci:0000:00:1e.0
> > C0E8 S3 disabled pci:0000:00:1d.0
> > C0EF S3 disabled pci:0000:00:1d.1
> > C0F0 S3 disabled pci:0000:00:1d.2
> > C0F1 S3 disabled pci:0000:00:1d.3
> > C0F2 S3 disabled pci:0000:00:1d.7
> > C0F9 S0 disabled pci:0000:00:1c.0
> > C21D S0 disabled pci:0000:08:00.0
> > C109 S5 disabled pci:0000:00:1c.1
> > C228 S5 disabled pci:0000:10:00.0
> > C10F S5 disabled pci:0000:00:1c.3
> > C229 S5 disabled
> > [root@localhost ~]#
> >
> > After applying this patch, the output is:
> >
> > [root@localhost ~]# cat /proc/acpi/wakeup
> > Device S-state Status Sysfs node PCI ID
> > C093 S5 disabled pci:0000:00:1e.0 0x2448
> > C0E8 S3 disabled pci:0000:00:1d.0 0x27c8
> > C0EF S3 disabled pci:0000:00:1d.1 0x27c9
> > C0F0 S3 disabled pci:0000:00:1d.2 0x27ca
> > C0F1 S3 disabled pci:0000:00:1d.3 0x27cb
> > C0F2 S3 disabled pci:0000:00:1d.7 0x27cc
> > C0F9 S0 disabled pci:0000:00:1c.0 0x27d0
> > C21D S0 disabled pci:0000:08:00.0 0x16fd
> > C109 S5 disabled pci:0000:00:1c.1 0x27d2
> > C228 S5 disabled pci:0000:10:00.0 0x4222
> > C10F S5 disabled pci:0000:00:1c.3 0x27d6
> > C229 S5 disabled
>



\
 
 \ /
  Last update: 2008-01-02 03:09    [W:0.217 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site