Messages in this thread Patch in this message | | | Date | Tue, 1 Jan 2008 21:10:31 +0100 | From | Andreas Mohr <> | Subject | Re: [RFC/PATCH] e100 driver didn't support any MII-less PHYs... |
| |
Hi,
On Sat, Dec 29, 2007 at 09:54:45PM -0800, Kok, Auke wrote: > ok, barely glanced over the patch but it might just be fine. Can you split up this > patch and send a separate patch for the spelling mistakes? I'll then have some > quick testing done on the result and do a bit deeper review after newyears.
Part 2, the spelling corrections.
Thanks!
Signed-off-by: Andreas Mohr <andi@lisas.de>
--- linux-2.6.24-rc6/drivers/net/e100.c 2008-01-01 18:53:21.000000000 +0100 +++ linux-2.6.24-rc6/drivers/net/e100.c 2008-01-01 18:53:25.000000000 +0100 @@ -94,7 +94,7 @@ * enabled. 82557 pads with 7Eh, while the later controllers pad * with 00h. * - * IV. Recieve + * IV. Receive * * The Receive Frame Area (RFA) comprises a ring of Receive Frame * Descriptors (RFD) + data buffer, thus forming the simplified mode @@ -113,7 +113,7 @@ * and Rx indication and re-allocation happen in the same context, * therefore no locking is required. A software-generated interrupt * is generated from the watchdog to recover from a failed allocation - * senario where all Rx resources have been indicated and none re- + * scenario where all Rx resources have been indicated and none re- * placed. * * V. Miscellaneous @@ -958,7 +958,7 @@ /* Quadwords to DMA into FIFO before starting frame transmit */ nic->tx_threshold = 0xE0; - /* no interrupt for every tx completion, delay = 256us if not 557*/ + /* no interrupt for every tx completion, delay = 256us if not 557 */ nic->tx_command = cpu_to_le16(cb_tx | cb_tx_sf | ((nic->mac >= mac_82558_D101_A4) ? cb_cid : cb_i)); @@ -1550,7 +1550,7 @@ &s->complete; /* Device's stats reporting may take several microseconds to - * complete, so where always waiting for results of the + * complete, so we're always waiting for results of the * previous command. */ if(*complete == le32_to_cpu(cuc_dump_reset_complete)) { @@ -2884,17 +2884,17 @@ /** * e100_io_error_detected - called when PCI error is detected. * @pdev: Pointer to PCI device - * @state: The current pci conneection state + * @state: The current pci connection state */ static pci_ers_result_t e100_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state) { struct net_device *netdev = pci_get_drvdata(pdev); struct nic *nic = netdev_priv(netdev); - /* Similar to calling e100_down(), but avoids adpater I/O. */ + /* Similar to calling e100_down(), but avoids adapter I/O. */ netdev->stop(netdev); - /* Detach; put netif into state similar to hotplug unplug. */ + /* Detach; put netif into a state similar to hotplug unplug. */ napi_enable(&nic->napi); netif_device_detach(netdev); pci_disable_device(pdev);
| |