lkml.org 
[lkml]   [2007]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] PHYLIB: IRQ event workqueue handling fixes
On Wed, 19 Sep 2007 15:38:19 +0100 (BST)
"Maciej W. Rozycki" <macro@linux-mips.org> wrote:

> Keep track of disable_irq_nosync() invocations and call enable_irq() the
> right number of times if work has been cancelled that would include them.
>
> Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
> ---
> Now that the call to flush_work_keventd() (problematic because of
> rtnl_mutex being held) has been replaced by cancel_work_sync() another
> issue has arisen and been left unresolved. As the MDIO bus cannot be
> accessed from the interrupt context the PHY interrupt handler uses
> disable_irq_nosync() to prevent from looping and schedules some work to be
> done as a softirq, which, apart from handling the state change of the
> originating PHY, is responsible for reenabling the interrupt. Now if the
> interrupt line is shared by another device and a call to the softirq
> handler has been cancelled, that call to enable_irq() never happens and
> the other device cannot use its interrupt anymore as its stuck disabled.
>
> I decided to use a counter rather than a flag because there may be more
> than one call to phy_change() cancelled in the queue -- a real one and a
> fake one triggered by free_irq() if DEBUG_SHIRQ is used, if nothing else.
> Therefore because of its nesting property enable_irq() has to be called
> the right number of times to match the number disable_irq_nosync() was
> called and restore the original state. This DEBUG_SHIRQ feature is also
> the reason why free_irq() has to be called before cancel_work_sync().
>
> While at it I updated the comment about phy_stop_interrupts() being
> called from `keventd' -- this is no longer relevant as the use of
> cancel_work_sync() makes such an approach unnecessary. OTOH a similar
> comment referring to flush_scheduled_work() in phy_stop() still applies as
> using cancel_work_sync() there would be dangerous.
>
> Checked with checkpatch.pl and at the run time (with and without
> DEBUG_SHIRQ).

You always put boring, crappy, insufficient text in the for-the-changelog
section and interesting, useful, sufficient text in the not-for-the-changelog
section.

But you can't fool me! I have an editor and I fix it up.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-09-21 01:57    [W:0.243 / U:0.820 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site