lkml.org 
[lkml]   [2007]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: vm86.c audit_syscall_exit() call trashes registers
Date
The system was otherwise completely idle.  The only active task was  
starting the X server.

The failure is 100% reproducible on my test system.

We have not run a lot of different kernels per se. We ran 2.6.9, and
it was fine. When we ran RHEL 5, it came with 2.6.18. All we really
did was rebuild 2.6.18 with that chunk of code removed, and the
problem went away. Mind you, when that chunk of code was removed,
there were a ton of errors about multiply freed audit blocks. But at
least the X server EDID transfer was successful.

As far as enabling/disabling the audit functionality: I'm clueless
about it. I think RHEL turned it on by default, but I don't know how
to turn it on or off myself.

I will also note that the small stand-alone utility read_edid never
failed. It was only when vm86 was called from inside of the X
server. So perhaps there's a race condition with memory not being
where it's expected to be when a large app calls out to real mode?

-Bill

----

William Cattey
Linux Platform Coordinator
MIT Information Services & Technology

W92-176, 617-253-0140, wdc@mit.edu
http://web.mit.edu/wdc/www/


On Aug 14, 2007, at 5:28 PM, Andi Kleen wrote:

> On Tue, Aug 14, 2007 at 04:52:54PM -0400, William Cattey wrote:
>> The corruption originally looked like a race condition.
>>
>> Sometimes the EDID buffer would be all zeros.
>> Sometimes it would contain partial data, and then the rest of the
>> buffer filled with zeros.
>> The amount of data transferred into the buffer before going to all
>> zeros is non-deterministic.
>>
>> When we put a known value in each byte of the buffer before making
>> the vm86 call, the known data would always be overwritten either with
>> EDID data or zeros.
>
> Hmm, that might be consistent with something going wrong with
> sleeping.
> Was the system under high load? Perhaps something else can thrash
> some real mode state when you sleep. On the other hand vm86 in user
> mode can schedule anyways, so it might have already happened.
>
> But I think the mutex was actually added post 2.6.16 so if you saw
> it in 2.6.16 already it might have been something else.
>
> Also when audit is not enabled (did you have it enabled?) the audit
> function doesn't do very much?
>
> If you can reliably reproduce it one way might be to comment
> out more and more of the audit code until you find who causes
> the corruption (that might cause some corrupted audit data,
> but that should be fine for testing)
>
> -Andi

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-08-15 00:01    [W:0.346 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site