Messages in this thread | | | From | Lexington Luthor <> | Subject | Re: PROBLEM: Dell Inspiron 1501 fails to boot in 2.6.21+ | Date | Sun, 22 Jul 2007 09:36:09 +0100 |
| |
I have the exact same problem and the only way I found to get a reliable kernel 2.6.2[12] running (i.e. Without sporadic "lost interrupt" messages in dmesg) is to disable ACPI.
Just boot with acpi=off and it will work. Sadly without ACPI its damn near useless on battery. There is a BIOS update for thr 1501 on the DELL site which might fix some of this, but haven't tried it yet. Vista works just fine even with ACPI so I don't think its a hardware problem.
Regards, LL
Mark Tiefenbruck wrote: > I'd appreciate any help on getting this report sent to the appropriate > list and, of course, getting this fixed. I don't know what's useful, > so you're getting everything. This will be a very long e-mail. > > My new laptop won't boot with kernel versions 2.6.21 or 2.6.22 . No > oops. No panic. It just stops printing messages. Maybe it would > eventually continue if I wait long enough, but it's unacceptable > either way. I include below the contents of dmesg for a working kernel > up to the point where it halts. I'm also including what it usually > does for a few lines after that point. > > I did git-bisect on the 2.6.21.y tree. I'm including the result of > that as well. It mentions HPET, so I should mention my computer also > fails to boot when I enable HPET in my BIOS. I don't have the details > of this currently; I can reproduce it again if needed. > > I've also included my kernel configuration and ver_linux output. > You'll notice that my gcc version is 4.2.0, but this also happens with > 4.1.2. I'm including /proc/cpuinfo and lspci -vvv. I'm including > /proc/ioports and /proc/iomem. I don't have a /proc/scsi. > > Thanks, > Mark > > > Here's the commit that causes the problem: > > > > e9e2cdb412412326c4827fc78ba27f410d837e6e is first bad commit > commit e9e2cdb412412326c4827fc78ba27f410d837e6e > Author: Thomas Gleixner <tglx@linutronix.de> > Date: Fri Feb 16 01:28:04 2007 -0800 > > [PATCH] clockevents: i386 drivers > > Add clockevent drivers for i386: lapic (local) and PIT/HPET > (global). Update > the timer IRQ to call into the PIT/HPET driver's event handler and the > lapic-timer IRQ to call into the lapic clockevent driver. The > assignement of > timer functionality is delegated to the core framework code and > replaces the > compile and runtime evalution in do_timer_interrupt_hook() > > Use the clockevents broadcast support and implement the lapic_broadcast > function for ACPI. > > No changes to existing functionality. > > [ kdump fix from Vivek Goyal <vgoyal@in.ibm.com> ] > [ fixes based on review feedback from Arjan van de Ven > <arjan@infradead.org> ] > Cleanups-from: Adrian Bunk <bunk@stusta.de> > Build-fixes-from: Andrew Morton <akpm@osdl.org> > Signed-off-by: Thomas Gleixner <tglx@linutronix.de> > Signed-off-by: Ingo Molnar <mingo@elte.hu> > Cc: john stultz <johnstul@us.ibm.com> > Cc: Roman Zippel <zippel@linux-m68k.org> > Cc: Andi Kleen <ak@suse.de> > Signed-off-by: Andrew Morton <akpm@linux-foundation.org> > Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> > > :040000 040000 8cd88ef4dc6e976c589deda1c558e19ed8dcafde > 88ed93cefb145aa545ff4561636cc9342fc7bb42 M arch > :040000 040000 5a1342027bc77019bb3ca9295d02bf483410e3d4 > 3de4aedc5bb5d86287b7a5bad4b673e8ffbc1e44 M drivers > :040000 040000 88ade982261c3ce0590c939694994796f02d2e73 > d7221468ac776ccc7804f9a46d6d53fa7c294d43 M include > > > > Here is the content of dmesg up to the point where it halts: > > > > Linux version 2.6.20-gentoo-r9 (root@localhost) (gcc version 4.2.0 > (Gentoo 4.2.0 p1.4)) #1 SMP Fri Jul 20 15:22:51 PDT 2007 > BIOS-provided physical RAM map: > sanitize start > sanitize end > copy_e820_map() start: 0000000000000000 size: 000000000009dc00 end: > 000000000009dc00 type: 1 > copy_e820_map() type is E820_RAM > copy_e820_map() start: 000000000009dc00 size: 0000000000002400 end: > 00000000000a0000 type: 2 > copy_e820_map() start: 00000000000ce000 size: 0000000000032000 end: > 0000000000100000 type: 2 > copy_e820_map() start: 0000000000100000 size: 0000000037d70000 end: > 0000000037e70000 type: 1 > copy_e820_map() type is E820_RAM > copy_e820_map() start: 0000000037e70000 size: 0000000000010000 end: > 0000000037e80000 type: 3 > copy_e820_map() start: 0000000037e80000 size: 0000000000080000 end: > 0000000037f00000 type: 4 > copy_e820_map() start: 0000000037f00000 size: 0000000008100000 end: > 0000000040000000 type: 2 > copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: > 00000000f0000000 type: 2 > copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: > 00000000fec10000 type: 2 > copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: > 00000000fee01000 type: 2 > copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: > 0000000100000000 type: 2 > BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) > BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 0000000037e70000 (usable) > BIOS-e820: 0000000037e70000 - 0000000037e80000 (ACPI data) > BIOS-e820: 0000000037e80000 - 0000000037f00000 (ACPI NVS) > BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved) > BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) > 894MB LOWMEM available. > found SMP MP-table at 000f8530 > Entering add_active_range(0, 0, 228976) 0 entries of 256 used > Zone PFN ranges: > DMA 0 -> 4096 > Normal 4096 -> 228976 > early_node_map[1] active PFN ranges > 0: 0 -> 228976 > On node 0 totalpages: 228976 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 4064 pages, LIFO batch:0 > Normal zone: 1756 pages used for memmap > Normal zone: 223124 pages, LIFO batch:31 > DMI present. > ACPI: RSDP (v000 PTLTD ) @ 0x000f8500 > ACPI: RSDT (v001 DELL M08 0x06040000 LTP 0x00000000) @ 0x37e79564 > ACPI: FADT (v001 ATI Bowfin 0x06040000 ATI 0x000f4240) @ 0x37e7fb90 > ACPI: TCPA (v002 AMD 0x06040000 PTEC 0x00000000) @ 0x37e7fc04 > ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x37e7fc36 > ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ > 0x37e7fdfa > ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x37e7fe4e > ACPI: SLIC (v001 DELL M08 0x06040000 LTP 0x00000000) @ 0x37e7fe8a > ACPI: DSDT (v001 ATI SB600 0x06040000 MSFT 0x03000000) @ 0x00000000 > ATI board detected. Disabling timer routing over 8254. > ACPI: PM-Timer IO Port: 0x8008 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > Processor #0 15:8 APIC version 16 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > Processor #1 15:8 APIC version 16 > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 > ACPI: IRQ9 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) > Detected 1695.894 MHz processor. > Built 1 zonelists. Total pages: 227188 > Kernel command line: root=/dev/sda3 > mapped APIC to ffffd000 (fee00000) > mapped IOAPIC to ffffc000 (fec00000) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 16384 bytes) > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 902928k/915904k available (2898k kernel code, 12496k reserved, > 954k data, 232k init, 0k highmem) > virtual kernel memory layout: > fixmap : 0xfffb7000 - 0xfffff000 ( 288 kB) > vmalloc : 0xf8800000 - 0xfffb5000 ( 119 MB) > lowmem : 0xc0000000 - 0xf7e70000 ( 894 MB) > .init : 0xc04ca000 - 0xc0504000 ( 232 kB) > .data : 0xc03d480b - 0xc04c3058 ( 954 kB) > .text : 0xc0100000 - 0xc03d480b (2898 kB) > Checking if this processor honours the WP bit even in supervisor mode... > Ok. > Calibrating delay using timer specific routine.. 3394.66 BogoMIPS > (lpj=6789321) > Mount-cache hash table entries: 512 > CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 > 00002001 00000000 0000011f > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 256K (64 bytes/line) > CPU 0(2) -> Core 0 > CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 > 00002001 00000000 0000011f > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > Checking 'hlt' instruction... OK. > SMP alternatives: switching to UP code > ACPI: Core revision 20060707 > tbxface-0107 [01] load_tables : ACPI Tables successfully acquired > Parsing all Control Methods: > Table [DSDT](id 0006) - 818 Objects with 63 Devices 179 Methods 29 Regions > Parsing all Control Methods: > Table [SSDT](id 0004) - 8 Objects with 0 Devices 0 Methods 0 Regions > ACPI Namespace successfully loaded at root c0524c3c > evxfevnt-0089 [02] enable : Transition to ACPI mode > successful > CPU0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 stepping 01 > SMP alternatives: switching to SMP code > Booting processor 1/1 eip 3000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3391.71 BogoMIPS > (lpj=6783436) > CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 > 00002001 00000000 0000011f > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 256K (64 bytes/line) > CPU 1(2) -> Core 1 > CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 > 00002001 00000000 0000011f > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#1. > CPU1: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 stepping 01 > Total of 2 processors activated (6786.37 BogoMIPS). > ENABLING IO-APIC IRQs > ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 > ..MP-BIOS bug: 8254 timer not connected to IO-APIC > ...trying to set up timer (IRQ0) through the 8259A ... failed. > ...trying to set up timer as Virtual Wire IRQ... works. > checking TSC synchronization across 2 CPUs: > CPU#0 had -215 usecs TSC skew, fixed it up. > CPU#1 had 215 usecs TSC skew, fixed it up. > Brought up 2 CPUs > migration_cost=123 > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: Using MMCONFIG > PCI: No mmconfig possible on 0:18 > Setting up standard PCI resources > evgpeblk-0951 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on > int 0x9 > evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 3 > Runtime GPEs in this block > Completing Region/Field/Buffer/Package > initialization:....................................................................... > > Initialized 29/29 Regions 0/0 Fields 19/19 Buffers 23/37 Packages (835 > nodes) > Initializing Device/Processor/Thermal objects by executing _INI methods:... > Executed 3 _INI methods requiring 0 _STA executions (examined 68 objects) > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > Boot video device is 0000:01:05.0 > PCI: Transparent bridge - 0000:00:14.4 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled. > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] > SCSI subsystem initialized > libata version 2.00 loaded. > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a > report > PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0 > PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0 > PCI: Bridge: 0000:00:01.0 > IO window: 9000-9fff > MEM window: c0100000-c01fffff > PREFETCH window: c8000000-cfffffff > PCI: Bridge: 0000:00:05.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:06.0 > IO window: disabled. > MEM window: c0200000-c02fffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:14.4 > IO window: disabled. > MEM window: c0300000-c03fffff > PREFETCH window: disabled. > PCI: Setting latency timer of device 0000:00:05.0 to 64 > PCI: Setting latency timer of device 0000:00:06.0 to 64 > NET: Registered protocol family 2 > > > > The next few lines are usually as follows, but recent kernels never get > to them: > > > > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > microcode: CPU0 not a capable Intel processor > microcode: CPU1 not a capable Intel processor > > > > # > # Automatically generated make config: don't edit > # Linux kernel version: 2.6.20 > # Fri Jul 20 18:42:48 2007 > # > CONFIG_X86_32=y > CONFIG_GENERIC_TIME=y > CONFIG_CLOCKSOURCE_WATCHDOG=y > CONFIG_GENERIC_CLOCKEVENTS=y > CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y > CONFIG_LOCKDEP_SUPPORT=y > CONFIG_STACKTRACE_SUPPORT=y > CONFIG_SEMAPHORE_SLEEPERS=y > CONFIG_X86=y > CONFIG_MMU=y > CONFIG_ZONE_DMA=y > CONFIG_GENERIC_ISA_DMA=y > CONFIG_GENERIC_IOMAP=y > CONFIG_GENERIC_BUG=y > CONFIG_GENERIC_HWEIGHT=y > CONFIG_ARCH_MAY_HAVE_PC_FDC=y > CONFIG_DMI=y > CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" > > # > # Code maturity level options > # > CONFIG_EXPERIMENTAL=y > CONFIG_LOCK_KERNEL=y > CONFIG_INIT_ENV_ARG_LIMIT=32 > > # > # General setup > # > CONFIG_LOCALVERSION="" > CONFIG_LOCALVERSION_AUTO=y > CONFIG_SWAP=y > CONFIG_SYSVIPC=y > # CONFIG_IPC_NS is not set > CONFIG_SYSVIPC_SYSCTL=y > # CONFIG_POSIX_MQUEUE is not set > # CONFIG_BSD_PROCESS_ACCT is not set > # CONFIG_TASKSTATS is not set > # CONFIG_UTS_NS is not set > # CONFIG_AUDIT is not set > # CONFIG_IKCONFIG is not set > # CONFIG_CPUSETS is not set > # CONFIG_SYSFS_DEPRECATED is not set > # CONFIG_RELAY is not set > # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set > CONFIG_SYSCTL=y > # CONFIG_EMBEDDED is not set > CONFIG_UID16=y > CONFIG_SYSCTL_SYSCALL=y > CONFIG_KALLSYMS=y > # CONFIG_KALLSYMS_EXTRA_PASS is not set > CONFIG_HOTPLUG=y > CONFIG_PRINTK=y > CONFIG_BUG=y > CONFIG_ELF_CORE=y > CONFIG_BASE_FULL=y > CONFIG_FUTEX=y > CONFIG_EPOLL=y > CONFIG_SHMEM=y > CONFIG_SLAB=y > CONFIG_VM_EVENT_COUNTERS=y > CONFIG_RT_MUTEXES=y > # CONFIG_TINY_SHMEM is not set > CONFIG_BASE_SMALL=0 > # CONFIG_SLOB is not set > > # > # Loadable module support > # > CONFIG_MODULES=y > CONFIG_MODULE_UNLOAD=y > CONFIG_MODULE_FORCE_UNLOAD=y > # CONFIG_MODVERSIONS is not set > # CONFIG_MODULE_SRCVERSION_ALL is not set > # CONFIG_KMOD is not set > CONFIG_STOP_MACHINE=y > > # > # Block layer > # > CONFIG_BLOCK=y > # CONFIG_LBD is not set > # CONFIG_BLK_DEV_IO_TRACE is not set > # CONFIG_LSF is not set > > # > # IO Schedulers > # > CONFIG_IOSCHED_NOOP=y > CONFIG_IOSCHED_AS=y > # CONFIG_IOSCHED_DEADLINE is not set > # CONFIG_IOSCHED_CFQ is not set > CONFIG_DEFAULT_AS=y > # CONFIG_DEFAULT_DEADLINE is not set > # CONFIG_DEFAULT_CFQ is not set > # CONFIG_DEFAULT_NOOP is not set > CONFIG_DEFAULT_IOSCHED="anticipatory" > > # > # Processor type and features > # > CONFIG_SMP=y > CONFIG_X86_PC=y > # CONFIG_X86_ELAN is not set > # CONFIG_X86_VOYAGER is not set > # CONFIG_X86_NUMAQ is not set > # CONFIG_X86_SUMMIT is not set > # CONFIG_X86_BIGSMP is not set > # CONFIG_X86_VISWS is not set > # CONFIG_X86_GENERICARCH is not set > # CONFIG_X86_ES7000 is not set > # CONFIG_PARAVIRT is not set > # CONFIG_M386 is not set > # CONFIG_M486 is not set > # CONFIG_M586 is not set > # CONFIG_M586TSC is not set > # CONFIG_M586MMX is not set > # CONFIG_M686 is not set > # CONFIG_MPENTIUMII is not set > # CONFIG_MPENTIUMIII is not set > # CONFIG_MPENTIUMM is not set > # CONFIG_MCORE2 is not set > # CONFIG_MPENTIUM4 is not set > # CONFIG_MK6 is not set > # CONFIG_MK7 is not set > CONFIG_MK8=y > # CONFIG_MCRUSOE is not set > # CONFIG_MEFFICEON is not set > # CONFIG_MWINCHIPC6 is not set > # CONFIG_MWINCHIP2 is not set > # CONFIG_MWINCHIP3D is not set > # CONFIG_MGEODEGX1 is not set > # CONFIG_MGEODE_LX is not set > # CONFIG_MCYRIXIII is not set > # CONFIG_MVIAC3_2 is not set > # CONFIG_X86_GENERIC is not set > CONFIG_X86_CMPXCHG=y > CONFIG_X86_L1_CACHE_SHIFT=6 > CONFIG_RWSEM_XCHGADD_ALGORITHM=y > # CONFIG_ARCH_HAS_ILOG2_U32 is not set > # CONFIG_ARCH_HAS_ILOG2_U64 is not set > CONFIG_GENERIC_CALIBRATE_DELAY=y > CONFIG_X86_WP_WORKS_OK=y > CONFIG_X86_INVLPG=y > CONFIG_X86_BSWAP=y > CONFIG_X86_POPAD_OK=y > CONFIG_X86_CMPXCHG64=y > CONFIG_X86_GOOD_APIC=y > CONFIG_X86_INTEL_USERCOPY=y > CONFIG_X86_USE_PPRO_CHECKSUM=y > CONFIG_X86_TSC=y > CONFIG_HPET_TIMER=y > CONFIG_NR_CPUS=2 > # CONFIG_SCHED_SMT is not set > CONFIG_SCHED_MC=y > # CONFIG_PREEMPT_NONE is not set > CONFIG_PREEMPT_VOLUNTARY=y > # CONFIG_PREEMPT is not set > CONFIG_PREEMPT_BKL=y > CONFIG_X86_LOCAL_APIC=y > CONFIG_X86_IO_APIC=y > CONFIG_X86_MCE=y > # CONFIG_X86_MCE_NONFATAL is not set > # CONFIG_X86_MCE_P4THERMAL is not set > CONFIG_VM86=y > # CONFIG_TOSHIBA is not set > # CONFIG_I8K is not set > # CONFIG_X86_REBOOTFIXUPS is not set > CONFIG_MICROCODE=y > CONFIG_MICROCODE_OLD_INTERFACE=y > CONFIG_X86_MSR=y > CONFIG_X86_CPUID=y > > # > # Firmware Drivers > # > # CONFIG_EDD is not set > # CONFIG_DELL_RBU is not set > # CONFIG_DCDBAS is not set > CONFIG_NOHIGHMEM=y > # CONFIG_HIGHMEM4G is not set > # CONFIG_HIGHMEM64G is not set > CONFIG_PAGE_OFFSET=0xC0000000 > CONFIG_ARCH_FLATMEM_ENABLE=y > CONFIG_ARCH_SPARSEMEM_ENABLE=y > CONFIG_ARCH_SELECT_MEMORY_MODEL=y > CONFIG_ARCH_POPULATES_NODE_MAP=y > CONFIG_SELECT_MEMORY_MODEL=y > CONFIG_FLATMEM_MANUAL=y > # CONFIG_DISCONTIGMEM_MANUAL is not set > # CONFIG_SPARSEMEM_MANUAL is not set > CONFIG_FLATMEM=y > CONFIG_FLAT_NODE_MEM_MAP=y > CONFIG_SPARSEMEM_STATIC=y > CONFIG_SPLIT_PTLOCK_CPUS=4 > # CONFIG_RESOURCES_64BIT is not set > CONFIG_ZONE_DMA_FLAG=1 > # CONFIG_MATH_EMULATION is not set > CONFIG_MTRR=y > # CONFIG_EFI is not set > # CONFIG_IRQBALANCE is not set > CONFIG_SECCOMP=y > # CONFIG_HZ_100 is not set > CONFIG_HZ_250=y > # CONFIG_HZ_300 is not set > # CONFIG_HZ_1000 is not set > CONFIG_HZ=250 > # CONFIG_KEXEC is not set > CONFIG_PHYSICAL_START=0x100000 > # CONFIG_RELOCATABLE is not set > CONFIG_PHYSICAL_ALIGN=0x100000 > CONFIG_HOTPLUG_CPU=y > # CONFIG_COMPAT_VDSO is not set > > # > # Power management options (ACPI, APM) > # > CONFIG_PM=y > # CONFIG_PM_LEGACY is not set > # CONFIG_PM_DEBUG is not set > # CONFIG_PM_SYSFS_DEPRECATED is not set > CONFIG_SOFTWARE_SUSPEND=y > CONFIG_PM_STD_PARTITION="/dev/sda2" > CONFIG_SUSPEND_SMP=y > > # > # ACPI (Advanced Configuration and Power Interface) Support > # > CONFIG_ACPI=y > CONFIG_ACPI_SLEEP=y > CONFIG_ACPI_SLEEP_PROC_FS=y > # CONFIG_ACPI_SLEEP_PROC_SLEEP is not set > CONFIG_ACPI_PROCFS=y > CONFIG_ACPI_AC=y > CONFIG_ACPI_BATTERY=y > CONFIG_ACPI_BUTTON=y > CONFIG_ACPI_VIDEO=y > # CONFIG_ACPI_HOTKEY is not set > CONFIG_ACPI_FAN=y > # CONFIG_ACPI_DOCK is not set > # CONFIG_ACPI_BAY is not set > CONFIG_ACPI_PROCESSOR=y > CONFIG_ACPI_HOTPLUG_CPU=y > CONFIG_ACPI_THERMAL=y > # CONFIG_ACPI_ASUS is not set > # CONFIG_ACPI_IBM is not set > # CONFIG_ACPI_TOSHIBA is not set > CONFIG_ACPI_BLACKLIST_YEAR=2001 > CONFIG_ACPI_DEBUG=y > CONFIG_ACPI_EC=y > CONFIG_ACPI_POWER=y > CONFIG_ACPI_SYSTEM=y > CONFIG_X86_PM_TIMER=y > CONFIG_ACPI_CONTAINER=y > # CONFIG_ACPI_SBS is not set > > # > # APM (Advanced Power Management) BIOS Support > # > # CONFIG_APM is not set > > # > # CPU Frequency scaling > # > CONFIG_CPU_FREQ=y > CONFIG_CPU_FREQ_TABLE=y > # CONFIG_CPU_FREQ_DEBUG is not set > # CONFIG_CPU_FREQ_STAT is not set > # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set > CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y > CONFIG_CPU_FREQ_GOV_PERFORMANCE=y > CONFIG_CPU_FREQ_GOV_POWERSAVE=y > CONFIG_CPU_FREQ_GOV_USERSPACE=y > CONFIG_CPU_FREQ_GOV_ONDEMAND=y > CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y > > # > # CPUFreq processor drivers > # > CONFIG_X86_ACPI_CPUFREQ=y > # CONFIG_X86_POWERNOW_K6 is not set > # CONFIG_X86_POWERNOW_K7 is not set > CONFIG_X86_POWERNOW_K8=y > CONFIG_X86_POWERNOW_K8_ACPI=y > # CONFIG_X86_GX_SUSPMOD is not set > # CONFIG_X86_SPEEDSTEP_CENTRINO is not set > # CONFIG_X86_SPEEDSTEP_ICH is not set > # CONFIG_X86_SPEEDSTEP_SMI is not set > # CONFIG_X86_P4_CLOCKMOD is not set > # CONFIG_X86_CPUFREQ_NFORCE2 is not set > # CONFIG_X86_LONGRUN is not set > # CONFIG_X86_LONGHAUL is not set > > # > # shared options > # > # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set > # CONFIG_X86_SPEEDSTEP_LIB is not set > > # > # Bus options (PCI, PCMCIA, EISA, MCA, ISA) > # > CONFIG_PCI=y > # CONFIG_PCI_GOBIOS is not set > # CONFIG_PCI_GOMMCONFIG is not set > # CONFIG_PCI_GODIRECT is not set > CONFIG_PCI_GOANY=y > CONFIG_PCI_BIOS=y > CONFIG_PCI_DIRECT=y > CONFIG_PCI_MMCONFIG=y > # CONFIG_PCIEPORTBUS is not set > # CONFIG_PCI_MSI is not set > # CONFIG_HT_IRQ is not set > CONFIG_ISA_DMA_API=y > # CONFIG_ISA is not set > # CONFIG_MCA is not set > # CONFIG_SCx200 is not set > CONFIG_K8_NB=y > > # > # PCCARD (PCMCIA/CardBus) support > # > # CONFIG_PCCARD is not set > > # > # PCI Hotplug Support > # > # CONFIG_HOTPLUG_PCI is not set > > # > # Executable file formats > # > CONFIG_BINFMT_ELF=y > # CONFIG_BINFMT_AOUT is not set > # CONFIG_BINFMT_MISC is not set > > # > # Networking > # > CONFIG_NET=y > > # > # Networking options > # > # CONFIG_NETDEBUG is not set > CONFIG_PACKET=y > # CONFIG_PACKET_MMAP is not set > CONFIG_UNIX=y > CONFIG_XFRM=y > # CONFIG_XFRM_USER is not set > # CONFIG_XFRM_SUB_POLICY is not set > # CONFIG_XFRM_MIGRATE is not set > # CONFIG_NET_KEY is not set > CONFIG_INET=y > CONFIG_IP_MULTICAST=y > # CONFIG_IP_ADVANCED_ROUTER is not set > CONFIG_IP_FIB_HASH=y > CONFIG_IP_PNP=y > CONFIG_IP_PNP_DHCP=y > # CONFIG_IP_PNP_BOOTP is not set > # CONFIG_IP_PNP_RARP is not set > # CONFIG_NET_IPIP is not set > # CONFIG_NET_IPGRE is not set > # CONFIG_IP_MROUTE is not set > # CONFIG_ARPD is not set > # CONFIG_SYN_COOKIES is not set > # CONFIG_INET_AH is not set > # CONFIG_INET_ESP is not set > # CONFIG_INET_IPCOMP is not set > # CONFIG_INET_XFRM_TUNNEL is not set > CONFIG_INET_TUNNEL=y > CONFIG_INET_XFRM_MODE_TRANSPORT=y > CONFIG_INET_XFRM_MODE_TUNNEL=y > # CONFIG_INET_XFRM_MODE_BEET is not set > CONFIG_INET_DIAG=y > CONFIG_INET_TCP_DIAG=y > # CONFIG_TCP_CONG_ADVANCED is not set > CONFIG_TCP_CONG_CUBIC=y > CONFIG_DEFAULT_TCP_CONG="cubic" > # CONFIG_TCP_MD5SIG is not set > CONFIG_IPV6=y > # CONFIG_IPV6_PRIVACY is not set > # CONFIG_IPV6_ROUTER_PREF is not set > # CONFIG_INET6_AH is not set > # CONFIG_INET6_ESP is not set > # CONFIG_INET6_IPCOMP is not set > # CONFIG_IPV6_MIP6 is not set > # CONFIG_INET6_XFRM_TUNNEL is not set > # CONFIG_INET6_TUNNEL is not set > CONFIG_INET6_XFRM_MODE_TRANSPORT=y > CONFIG_INET6_XFRM_MODE_TUNNEL=y > # CONFIG_INET6_XFRM_MODE_BEET is not set > # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set > CONFIG_IPV6_SIT=y > # CONFIG_IPV6_TUNNEL is not set > # CONFIG_IPV6_MULTIPLE_TABLES is not set > # CONFIG_NETWORK_SECMARK is not set > # CONFIG_NETFILTER is not set > > # > # DCCP Configuration (EXPERIMENTAL) > # > # CONFIG_IP_DCCP is not set > > # > # SCTP Configuration (EXPERIMENTAL) > # > # CONFIG_IP_SCTP is not set > > # > # TIPC Configuration (EXPERIMENTAL) > # > # CONFIG_TIPC is not set > # CONFIG_ATM is not set > # CONFIG_BRIDGE is not set > # CONFIG_VLAN_8021Q is not set > # CONFIG_DECNET is not set > # CONFIG_LLC2 is not set > # CONFIG_IPX is not set > # CONFIG_ATALK is not set > # CONFIG_X25 is not set > # CONFIG_LAPB is not set > # CONFIG_ECONET is not set > # CONFIG_WAN_ROUTER is not set > > # > # QoS and/or fair queueing > # > # CONFIG_NET_SCHED is not set > > # > # Network testing > # > # CONFIG_NET_PKTGEN is not set > # CONFIG_HAMRADIO is not set > # CONFIG_IRDA is not set > # CONFIG_BT is not set > CONFIG_IEEE80211=y > # CONFIG_IEEE80211_DEBUG is not set > # CONFIG_IEEE80211_CRYPT_WEP is not set > # CONFIG_IEEE80211_CRYPT_CCMP is not set > # CONFIG_IEEE80211_CRYPT_TKIP is not set > # CONFIG_IEEE80211_SOFTMAC is not set > CONFIG_WIRELESS_EXT=y > > # > # Device Drivers > # > > # > # Generic Driver Options > # > CONFIG_STANDALONE=y > CONFIG_PREVENT_FIRMWARE_BUILD=y > CONFIG_FW_LOADER=y > # CONFIG_SYS_HYPERVISOR is not set > > # > # Connector - unified userspace <-> kernelspace linker > # > # CONFIG_CONNECTOR is not set > > # > # Memory Technology Devices (MTD) > # > # CONFIG_MTD is not set > > # > # Parallel port support > # > # CONFIG_PARPORT is not set > > # > # Plug and Play support > # > # CONFIG_PNP is not set > > # > # Block devices > # > # CONFIG_BLK_DEV_FD is not set > # CONFIG_BLK_CPQ_DA is not set > # CONFIG_BLK_CPQ_CISS_DA is not set > # CONFIG_BLK_DEV_DAC960 is not set > # CONFIG_BLK_DEV_UMEM is not set > # CONFIG_BLK_DEV_COW_COMMON is not set > CONFIG_BLK_DEV_LOOP=y > # CONFIG_BLK_DEV_CRYPTOLOOP is not set > # CONFIG_BLK_DEV_NBD is not set > # CONFIG_BLK_DEV_SX8 is not set > # CONFIG_BLK_DEV_UB is not set > # CONFIG_BLK_DEV_RAM is not set > # CONFIG_BLK_DEV_INITRD is not set > CONFIG_CDROM_PKTCDVD=y > CONFIG_CDROM_PKTCDVD_BUFFERS=8 > # CONFIG_CDROM_PKTCDVD_WCACHE is not set > # CONFIG_ATA_OVER_ETH is not set > > # > # Misc devices > # > # CONFIG_IBM_ASM is not set > # CONFIG_SGI_IOC4 is not set > # CONFIG_TIFM_CORE is not set > # CONFIG_MSI_LAPTOP is not set > > # > # ATA/ATAPI/MFM/RLL support > # > CONFIG_IDE=y > CONFIG_BLK_DEV_IDE=y > > # > # Please see Documentation/ide.txt for help/info on IDE drives > # > # CONFIG_BLK_DEV_IDE_SATA is not set > # CONFIG_BLK_DEV_HD_IDE is not set > # CONFIG_BLK_DEV_IDEDISK is not set > # CONFIG_IDEDISK_MULTI_MODE is not set > CONFIG_BLK_DEV_IDECD=y > # CONFIG_BLK_DEV_IDETAPE is not set > # CONFIG_BLK_DEV_IDEFLOPPY is not set > # CONFIG_BLK_DEV_IDESCSI is not set > CONFIG_BLK_DEV_IDEACPI=y > # CONFIG_IDE_TASK_IOCTL is not set > > # > # IDE chipset support/bugfixes > # > CONFIG_IDE_GENERIC=y > # CONFIG_BLK_DEV_CMD640 is not set > CONFIG_BLK_DEV_IDEPCI=y > # CONFIG_IDEPCI_SHARE_IRQ is not set > # CONFIG_BLK_DEV_OFFBOARD is not set > # CONFIG_BLK_DEV_GENERIC is not set > # CONFIG_BLK_DEV_OPTI621 is not set > # CONFIG_BLK_DEV_RZ1000 is not set > CONFIG_BLK_DEV_IDEDMA_PCI=y > # CONFIG_BLK_DEV_IDEDMA_FORCED is not set > CONFIG_IDEDMA_PCI_AUTO=y > # CONFIG_IDEDMA_ONLYDISK is not set > # CONFIG_BLK_DEV_AEC62XX is not set > # CONFIG_BLK_DEV_ALI15X3 is not set > CONFIG_BLK_DEV_AMD74XX=y > CONFIG_BLK_DEV_ATIIXP=y > # CONFIG_BLK_DEV_CMD64X is not set > # CONFIG_BLK_DEV_TRIFLEX is not set > # CONFIG_BLK_DEV_CY82C693 is not set > # CONFIG_BLK_DEV_CS5520 is not set > # CONFIG_BLK_DEV_CS5530 is not set > # CONFIG_BLK_DEV_CS5535 is not set > # CONFIG_BLK_DEV_HPT34X is not set > # CONFIG_BLK_DEV_HPT366 is not set > # CONFIG_BLK_DEV_JMICRON is not set > # CONFIG_BLK_DEV_SC1200 is not set > CONFIG_BLK_DEV_PIIX=y > # CONFIG_BLK_DEV_IT8213 is not set > # CONFIG_BLK_DEV_IT821X is not set > # CONFIG_BLK_DEV_NS87415 is not set > # CONFIG_BLK_DEV_PDC202XX_OLD is not set > # CONFIG_BLK_DEV_PDC202XX_NEW is not set > # CONFIG_BLK_DEV_SVWKS is not set > # CONFIG_BLK_DEV_SIIMAGE is not set > # CONFIG_BLK_DEV_SIS5513 is not set > # CONFIG_BLK_DEV_SLC90E66 is not set > # CONFIG_BLK_DEV_TRM290 is not set > # CONFIG_BLK_DEV_VIA82CXXX is not set > # CONFIG_BLK_DEV_TC86C001 is not set > # CONFIG_IDE_ARM is not set > CONFIG_BLK_DEV_IDEDMA=y > # CONFIG_IDEDMA_IVB is not set > CONFIG_IDEDMA_AUTO=y > # CONFIG_BLK_DEV_HD is not set > > # > # SCSI device support > # > # CONFIG_RAID_ATTRS is not set > CONFIG_SCSI=y > # CONFIG_SCSI_TGT is not set > CONFIG_SCSI_NETLINK=y > # CONFIG_SCSI_PROC_FS is not set > > # > # SCSI support type (disk, tape, CD-ROM) > # > CONFIG_BLK_DEV_SD=y > # CONFIG_CHR_DEV_ST is not set > # CONFIG_CHR_DEV_OSST is not set > # CONFIG_BLK_DEV_SR is not set > # CONFIG_CHR_DEV_SG is not set > # CONFIG_CHR_DEV_SCH is not set > > # > # Some SCSI devices (e.g. CD jukebox) support multiple LUNs > # > # CONFIG_SCSI_MULTI_LUN is not set > # CONFIG_SCSI_CONSTANTS is not set > # CONFIG_SCSI_LOGGING is not set > # CONFIG_SCSI_SCAN_ASYNC is not set > > # > # SCSI Transports > # > CONFIG_SCSI_SPI_ATTRS=y > CONFIG_SCSI_FC_ATTRS=y > # CONFIG_SCSI_ISCSI_ATTRS is not set > # CONFIG_SCSI_SAS_ATTRS is not set > # CONFIG_SCSI_SAS_LIBSAS is not set > > # > # SCSI low-level drivers > # > # CONFIG_ISCSI_TCP is not set > CONFIG_BLK_DEV_3W_XXXX_RAID=y > # CONFIG_SCSI_3W_9XXX is not set > # CONFIG_SCSI_ACARD is not set > # CONFIG_SCSI_AACRAID is not set > CONFIG_SCSI_AIC7XXX=y > CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 > CONFIG_AIC7XXX_RESET_DELAY_MS=5000 > CONFIG_AIC7XXX_DEBUG_ENABLE=y > CONFIG_AIC7XXX_DEBUG_MASK=0 > CONFIG_AIC7XXX_REG_PRETTY_PRINT=y > # CONFIG_SCSI_AIC7XXX_OLD is not set > CONFIG_SCSI_AIC79XX=y > CONFIG_AIC79XX_CMDS_PER_DEVICE=32 > CONFIG_AIC79XX_RESET_DELAY_MS=4000 > # CONFIG_AIC79XX_ENABLE_RD_STRM is not set > # CONFIG_AIC79XX_DEBUG_ENABLE is not set > CONFIG_AIC79XX_DEBUG_MASK=0 > # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set > # CONFIG_SCSI_AIC94XX is not set > # CONFIG_SCSI_DPT_I2O is not set > # CONFIG_SCSI_ADVANSYS is not set > # CONFIG_SCSI_ARCMSR is not set > # CONFIG_MEGARAID_NEWGEN is not set > # CONFIG_MEGARAID_LEGACY is not set > # CONFIG_MEGARAID_SAS is not set > # CONFIG_SCSI_HPTIOP is not set > # CONFIG_SCSI_BUSLOGIC is not set > # CONFIG_SCSI_DMX3191D is not set > # CONFIG_SCSI_EATA is not set > # CONFIG_SCSI_FUTURE_DOMAIN is not set > # CONFIG_SCSI_GDTH is not set > # CONFIG_SCSI_IPS is not set > # CONFIG_SCSI_INITIO is not set > # CONFIG_SCSI_INIA100 is not set > # CONFIG_SCSI_STEX is not set > # CONFIG_SCSI_SYM53C8XX_2 is not set > # CONFIG_SCSI_IPR is not set > # CONFIG_SCSI_QLOGIC_1280 is not set > # CONFIG_SCSI_QLA_FC is not set > # CONFIG_SCSI_QLA_ISCSI is not set > # CONFIG_SCSI_LPFC is not set > # CONFIG_SCSI_DC395x is not set > # CONFIG_SCSI_DC390T is not set > # CONFIG_SCSI_NSP32 is not set > # CONFIG_SCSI_DEBUG is not set > # CONFIG_SCSI_SRP is not set > > # > # Serial ATA (prod) and Parallel ATA (experimental) drivers > # > CONFIG_ATA=y > # CONFIG_ATA_NONSTANDARD is not set > CONFIG_SATA_AHCI=y > # CONFIG_SATA_SVW is not set > # CONFIG_ATA_PIIX is not set > # CONFIG_SATA_MV is not set > # CONFIG_SATA_NV is not set > # CONFIG_PDC_ADMA is not set > # CONFIG_SATA_QSTOR is not set > # CONFIG_SATA_PROMISE is not set > # CONFIG_SATA_SX4 is not set > # CONFIG_SATA_SIL is not set > # CONFIG_SATA_SIL24 is not set > # CONFIG_SATA_SIS is not set > # CONFIG_SATA_ULI is not set > # CONFIG_SATA_VIA is not set > # CONFIG_SATA_VITESSE is not set > # CONFIG_SATA_INIC162X is not set > CONFIG_SATA_INTEL_COMBINED=y > # CONFIG_PATA_ALI is not set > # CONFIG_PATA_AMD is not set > # CONFIG_PATA_ARTOP is not set > # CONFIG_PATA_ATIIXP is not set > # CONFIG_PATA_CMD64X is not set > # CONFIG_PATA_CS5520 is not set > # CONFIG_PATA_CS5530 is not set > # CONFIG_PATA_CS5535 is not set > # CONFIG_PATA_CYPRESS is not set > # CONFIG_PATA_EFAR is not set > # CONFIG_ATA_GENERIC is not set > # CONFIG_PATA_HPT366 is not set > # CONFIG_PATA_HPT37X is not set > # CONFIG_PATA_HPT3X2N is not set > # CONFIG_PATA_HPT3X3 is not set > # CONFIG_PATA_IT821X is not set > # CONFIG_PATA_IT8213 is not set > # CONFIG_PATA_JMICRON is not set > # CONFIG_PATA_TRIFLEX is not set > # CONFIG_PATA_MARVELL is not set > # CONFIG_PATA_MPIIX is not set > # CONFIG_PATA_OLDPIIX is not set > # CONFIG_PATA_NETCELL is not set > # CONFIG_PATA_NS87410 is not set > # CONFIG_PATA_OPTI is not set > # CONFIG_PATA_OPTIDMA is not set > # CONFIG_PATA_PDC_OLD is not set > # CONFIG_PATA_RADISYS is not set > # CONFIG_PATA_RZ1000 is not set > # CONFIG_PATA_SC1200 is not set > # CONFIG_PATA_SERVERWORKS is not set > # CONFIG_PATA_PDC2027X is not set > # CONFIG_PATA_SIL680 is not set > # CONFIG_PATA_SIS is not set > # CONFIG_PATA_VIA is not set > # CONFIG_PATA_WINBOND is not set > > # > # Multi-device support (RAID and LVM) > # > # CONFIG_MD is not set > > # > # Fusion MPT device support > # > # CONFIG_FUSION is not set > # CONFIG_FUSION_SPI is not set > # CONFIG_FUSION_FC is not set > # CONFIG_FUSION_SAS is not set > > # > # IEEE 1394 (FireWire) support > # > # CONFIG_IEEE1394 is not set > > # > # I2O device support > # > # CONFIG_I2O is not set > > # > # Macintosh device drivers > # > # CONFIG_MAC_EMUMOUSEBTN is not set > > # > # Network device support > # > CONFIG_NETDEVICES=y > # CONFIG_DUMMY is not set > # CONFIG_BONDING is not set > # CONFIG_EQUALIZER is not set > # CONFIG_TUN is not set > > # > # ARCnet devices > # > # CONFIG_ARCNET is not set > > # > # PHY device support > # > # CONFIG_PHYLIB is not set > > # > # Ethernet (10 or 100Mbit) > # > CONFIG_NET_ETHERNET=y > CONFIG_MII=y > # CONFIG_HAPPYMEAL is not set > # CONFIG_SUNGEM is not set > # CONFIG_CASSINI is not set > # CONFIG_NET_VENDOR_3COM is not set > > # > # Tulip family network device support > # > # CONFIG_NET_TULIP is not set > # CONFIG_HP100 is not set > CONFIG_NET_PCI=y > # CONFIG_PCNET32 is not set > # CONFIG_AMD8111_ETH is not set > # CONFIG_ADAPTEC_STARFIRE is not set > CONFIG_B44=y > # CONFIG_FORCEDETH is not set > # CONFIG_DGRS is not set > # CONFIG_EEPRO100 is not set > # CONFIG_E100 is not set > # CONFIG_FEALNX is not set > # CONFIG_NATSEMI is not set > # CONFIG_NE2K_PCI is not set > # CONFIG_8139CP is not set > # CONFIG_8139TOO is not set > # CONFIG_SIS900 is not set > # CONFIG_EPIC100 is not set > # CONFIG_SUNDANCE is not set > # CONFIG_TLAN is not set > # CONFIG_VIA_RHINE is not set > # CONFIG_SC92031 is not set > > # > # Ethernet (1000 Mbit) > # > # CONFIG_ACENIC is not set > # CONFIG_DL2K is not set > # CONFIG_E1000 is not set > # CONFIG_NS83820 is not set > # CONFIG_HAMACHI is not set > # CONFIG_YELLOWFIN is not set > # CONFIG_R8169 is not set > # CONFIG_SIS190 is not set > # CONFIG_SKGE is not set > # CONFIG_SKY2 is not set > # CONFIG_SK98LIN is not set > # CONFIG_VIA_VELOCITY is not set > # CONFIG_TIGON3 is not set > # CONFIG_BNX2 is not set > # CONFIG_QLA3XXX is not set > # CONFIG_ATL1 is not set > > # > # Ethernet (10000 Mbit) > # > # CONFIG_CHELSIO_T1 is not set > # CONFIG_CHELSIO_T3 is not set > # CONFIG_IXGB is not set > # CONFIG_S2IO is not set > # CONFIG_MYRI10GE is not set > # CONFIG_NETXEN_NIC is not set > > # > # Token Ring devices > # > # CONFIG_TR is not set > > # > # Wireless LAN (non-hamradio) > # > CONFIG_NET_RADIO=y > CONFIG_NET_WIRELESS_RTNETLINK=y > > # > # Obsolete Wireless cards support (pre-802.11) > # > # CONFIG_STRIP is not set > > # > # Wireless 802.11b ISA/PCI cards support > # > # CONFIG_IPW2100 is not set > # CONFIG_IPW2200 is not set > # CONFIG_AIRO is not set > # CONFIG_HERMES is not set > # CONFIG_ATMEL is not set > > # > # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support > # > # CONFIG_PRISM54 is not set > # CONFIG_USB_ZD1201 is not set > # CONFIG_HOSTAP is not set > CONFIG_NET_WIRELESS=y > > # > # Wan interfaces > # > # CONFIG_WAN is not set > # CONFIG_FDDI is not set > # CONFIG_HIPPI is not set > # CONFIG_PPP is not set > # CONFIG_SLIP is not set > # CONFIG_NET_FC is not set > # CONFIG_SHAPER is not set > # CONFIG_NETCONSOLE is not set > # CONFIG_NETPOLL is not set > # CONFIG_NET_POLL_CONTROLLER is not set > > # > # ISDN subsystem > # > # CONFIG_ISDN is not set > > # > # Telephony Support > # > # CONFIG_PHONE is not set > > # > # Input device support > # > CONFIG_INPUT=y > # CONFIG_INPUT_FF_MEMLESS is not set > > # > # Userland interfaces > # > CONFIG_INPUT_MOUSEDEV=y > # CONFIG_INPUT_MOUSEDEV_PSAUX is not set > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 > # CONFIG_INPUT_JOYDEV is not set > # CONFIG_INPUT_TSDEV is not set > CONFIG_INPUT_EVDEV=y > # CONFIG_INPUT_EVBUG is not set > > # > # Input Device Drivers > # > CONFIG_INPUT_KEYBOARD=y > CONFIG_KEYBOARD_ATKBD=y > # CONFIG_KEYBOARD_SUNKBD is not set > # CONFIG_KEYBOARD_LKKBD is not set > # CONFIG_KEYBOARD_XTKBD is not set > # CONFIG_KEYBOARD_NEWTON is not set > # CONFIG_KEYBOARD_STOWAWAY is not set > CONFIG_INPUT_MOUSE=y > CONFIG_MOUSE_PS2=y > # CONFIG_MOUSE_SERIAL is not set > # CONFIG_MOUSE_VSXXXAA is not set > # CONFIG_INPUT_JOYSTICK is not set > # CONFIG_INPUT_TOUCHSCREEN is not set > # CONFIG_INPUT_MISC is not set > > # > # Hardware I/O ports > # > CONFIG_SERIO=y > CONFIG_SERIO_I8042=y > # CONFIG_SERIO_SERPORT is not set > # CONFIG_SERIO_CT82C710 is not set > # CONFIG_SERIO_PCIPS2 is not set > CONFIG_SERIO_LIBPS2=y > # CONFIG_SERIO_RAW is not set > # CONFIG_GAMEPORT is not set > > # > # Character devices > # > CONFIG_VT=y > CONFIG_VT_CONSOLE=y > CONFIG_HW_CONSOLE=y > # CONFIG_VT_HW_CONSOLE_BINDING is not set > # CONFIG_SERIAL_NONSTANDARD is not set > > # > # Serial drivers > # > CONFIG_SERIAL_8250=y > CONFIG_SERIAL_8250_CONSOLE=y > CONFIG_SERIAL_8250_PCI=y > CONFIG_SERIAL_8250_NR_UARTS=4 > CONFIG_SERIAL_8250_RUNTIME_UARTS=4 > # CONFIG_SERIAL_8250_EXTENDED is not set > > # > # Non-8250 serial port support > # > CONFIG_SERIAL_CORE=y > CONFIG_SERIAL_CORE_CONSOLE=y > # CONFIG_SERIAL_JSM is not set > CONFIG_UNIX98_PTYS=y > # CONFIG_LEGACY_PTYS is not set > > # > # IPMI > # > # CONFIG_IPMI_HANDLER is not set > > # > # Watchdog Cards > # > # CONFIG_WATCHDOG is not set > CONFIG_HW_RANDOM=y > # CONFIG_HW_RANDOM_INTEL is not set > CONFIG_HW_RANDOM_AMD=y > # CONFIG_HW_RANDOM_GEODE is not set > # CONFIG_HW_RANDOM_VIA is not set > # CONFIG_NVRAM is not set > # CONFIG_RTC is not set > # CONFIG_GEN_RTC is not set > # CONFIG_DTLK is not set > # CONFIG_R3964 is not set > # CONFIG_APPLICOM is not set > # CONFIG_SONYPI is not set > CONFIG_AGP=y > # CONFIG_AGP_ALI is not set > CONFIG_AGP_ATI=y > # CONFIG_AGP_AMD is not set > CONFIG_AGP_AMD64=y > # CONFIG_AGP_INTEL is not set > # CONFIG_AGP_NVIDIA is not set > # CONFIG_AGP_SIS is not set > # CONFIG_AGP_SWORKS is not set > # CONFIG_AGP_VIA is not set > # CONFIG_AGP_EFFICEON is not set > # CONFIG_DRM is not set > # CONFIG_MWAVE is not set > # CONFIG_PC8736x_GPIO is not set > # CONFIG_NSC_GPIO is not set > # CONFIG_CS5535_GPIO is not set > # CONFIG_RAW_DRIVER is not set > # CONFIG_HPET is not set > # CONFIG_HANGCHECK_TIMER is not set > > # > # TPM devices > # > # CONFIG_TCG_TPM is not set > # CONFIG_TELCLOCK is not set > > # > # I2C support > # > CONFIG_I2C=y > # CONFIG_I2C_CHARDEV is not set > > # > # I2C Algorithms > # > CONFIG_I2C_ALGOBIT=y > # CONFIG_I2C_ALGOPCF is not set > # CONFIG_I2C_ALGOPCA is not set > > # > # I2C Hardware Bus support > # > # CONFIG_I2C_ALI1535 is not set > # CONFIG_I2C_ALI1563 is not set > # CONFIG_I2C_ALI15X3 is not set > # CONFIG_I2C_AMD756 is not set > # CONFIG_I2C_AMD8111 is not set > # CONFIG_I2C_I801 is not set > # CONFIG_I2C_I810 is not set > # CONFIG_I2C_PIIX4 is not set > # CONFIG_I2C_NFORCE2 is not set > # CONFIG_I2C_OCORES is not set > # CONFIG_I2C_PARPORT_LIGHT is not set > # CONFIG_I2C_PASEMI is not set > # CONFIG_I2C_PROSAVAGE is not set > # CONFIG_I2C_SAVAGE4 is not set > # CONFIG_SCx200_ACB is not set > # CONFIG_I2C_SIS5595 is not set > # CONFIG_I2C_SIS630 is not set > # CONFIG_I2C_SIS96X is not set > # CONFIG_I2C_STUB is not set > # CONFIG_I2C_VIA is not set > # CONFIG_I2C_VIAPRO is not set > # CONFIG_I2C_VOODOO3 is not set > # CONFIG_I2C_PCA_ISA is not set > > # > # Miscellaneous I2C Chip support > # > # CONFIG_SENSORS_DS1337 is not set > # CONFIG_SENSORS_DS1374 is not set > # CONFIG_SENSORS_EEPROM is not set > # CONFIG_SENSORS_PCF8574 is not set > # CONFIG_SENSORS_PCA9539 is not set > # CONFIG_SENSORS_PCF8591 is not set > # CONFIG_SENSORS_MAX6875 is not set > # CONFIG_I2C_DEBUG_CORE is not set > # CONFIG_I2C_DEBUG_ALGO is not set > # CONFIG_I2C_DEBUG_BUS is not set > # CONFIG_I2C_DEBUG_CHIP is not set > > # > # SPI support > # > # CONFIG_SPI is not set > # CONFIG_SPI_MASTER is not set > > # > # Dallas's 1-wire bus > # > # CONFIG_W1 is not set > > # > # Hardware Monitoring support > # > # CONFIG_HWMON is not set > # CONFIG_HWMON_VID is not set > > # > # Multimedia devices > # > # CONFIG_VIDEO_DEV is not set > > # > # Digital Video Broadcasting Devices > # > # CONFIG_DVB is not set > # CONFIG_USB_DABUSB is not set > > # > # Graphics support > # > # CONFIG_FIRMWARE_EDID is not set > CONFIG_FB=y > CONFIG_FB_DDC=y > CONFIG_FB_CFB_FILLRECT=y > CONFIG_FB_CFB_COPYAREA=y > CONFIG_FB_CFB_IMAGEBLIT=y > # CONFIG_FB_SVGALIB is not set > # CONFIG_FB_MACMODES is not set > # CONFIG_FB_BACKLIGHT is not set > CONFIG_FB_MODE_HELPERS=y > # CONFIG_FB_TILEBLITTING is not set > # CONFIG_FB_CIRRUS is not set > # CONFIG_FB_PM2 is not set > # CONFIG_FB_CYBER2000 is not set > # CONFIG_FB_ARC is not set > # CONFIG_FB_ASILIANT is not set > # CONFIG_FB_IMSTT is not set > # CONFIG_FB_VGA16 is not set > CONFIG_FB_VESA=y > # CONFIG_FB_HGA is not set > # CONFIG_FB_S1D13XXX is not set > # CONFIG_FB_NVIDIA is not set > # CONFIG_FB_RIVA is not set > # CONFIG_FB_I810 is not set > # CONFIG_FB_INTEL is not set > # CONFIG_FB_MATROX is not set > CONFIG_FB_RADEON=y > CONFIG_FB_RADEON_I2C=y > # CONFIG_FB_RADEON_DEBUG is not set > # CONFIG_FB_ATY128 is not set > # CONFIG_FB_ATY is not set > # CONFIG_FB_S3 is not set > # CONFIG_FB_SAVAGE is not set > # CONFIG_FB_SIS is not set > # CONFIG_FB_NEOMAGIC is not set > # CONFIG_FB_KYRO is not set > # CONFIG_FB_3DFX is not set > # CONFIG_FB_VOODOO1 is not set > # CONFIG_FB_CYBLA is not set > # CONFIG_FB_TRIDENT is not set > # CONFIG_FB_GEODE is not set > # CONFIG_FB_VIRTUAL is not set > > # > # Console display driver support > # > CONFIG_VGA_CONSOLE=y > CONFIG_VGACON_SOFT_SCROLLBACK=y > CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128 > CONFIG_VIDEO_SELECT=y > CONFIG_DUMMY_CONSOLE=y > # CONFIG_FRAMEBUFFER_CONSOLE is not set > > # > # Logo configuration > # > # CONFIG_LOGO is not set > CONFIG_BACKLIGHT_LCD_SUPPORT=y > CONFIG_BACKLIGHT_CLASS_DEVICE=y > CONFIG_BACKLIGHT_DEVICE=y > CONFIG_LCD_CLASS_DEVICE=y > CONFIG_LCD_DEVICE=y > > # > # Sound > # > CONFIG_SOUND=y > > # > # Advanced Linux Sound Architecture > # > CONFIG_SND=y > CONFIG_SND_TIMER=y > CONFIG_SND_PCM=y > # CONFIG_SND_SEQUENCER is not set > # CONFIG_SND_MIXER_OSS is not set > # CONFIG_SND_PCM_OSS is not set > # CONFIG_SND_DYNAMIC_MINORS is not set > # CONFIG_SND_SUPPORT_OLD_API is not set > # CONFIG_SND_VERBOSE_PROCFS is not set > # CONFIG_SND_VERBOSE_PRINTK is not set > # CONFIG_SND_DEBUG is not set > > # > # Generic devices > # > # CONFIG_SND_DUMMY is not set > # CONFIG_SND_MTPAV is not set > # CONFIG_SND_SERIAL_U16550 is not set > # CONFIG_SND_MPU401 is not set > > # > # PCI devices > # > # CONFIG_SND_AD1889 is not set > # CONFIG_SND_ALS300 is not set > # CONFIG_SND_ALS4000 is not set > # CONFIG_SND_ALI5451 is not set > # CONFIG_SND_ATIIXP is not set > # CONFIG_SND_ATIIXP_MODEM is not set > # CONFIG_SND_AU8810 is not set > # CONFIG_SND_AU8820 is not set > # CONFIG_SND_AU8830 is not set > # CONFIG_SND_AZT3328 is not set > # CONFIG_SND_BT87X is not set > # CONFIG_SND_CA0106 is not set > # CONFIG_SND_CMIPCI is not set > # CONFIG_SND_CS4281 is not set > # CONFIG_SND_CS46XX is not set > # CONFIG_SND_CS5535AUDIO is not set > # CONFIG_SND_DARLA20 is not set > # CONFIG_SND_GINA20 is not set > # CONFIG_SND_LAYLA20 is not set > # CONFIG_SND_DARLA24 is not set > # CONFIG_SND_GINA24 is not set > # CONFIG_SND_LAYLA24 is not set > # CONFIG_SND_MONA is not set > # CONFIG_SND_MIA is not set > # CONFIG_SND_ECHO3G is not set > # CONFIG_SND_INDIGO is not set > # CONFIG_SND_INDIGOIO is not set > # CONFIG_SND_INDIGODJ is not set > # CONFIG_SND_EMU10K1 is not set > # CONFIG_SND_EMU10K1X is not set > # CONFIG_SND_ENS1370 is not set > # CONFIG_SND_ENS1371 is not set > # CONFIG_SND_ES1938 is not set > # CONFIG_SND_ES1968 is not set > # CONFIG_SND_FM801 is not set > CONFIG_SND_HDA_INTEL=y > # CONFIG_SND_HDSP is not set > # CONFIG_SND_HDSPM is not set > # CONFIG_SND_ICE1712 is not set > # CONFIG_SND_ICE1724 is not set > # CONFIG_SND_INTEL8X0 is not set > # CONFIG_SND_INTEL8X0M is not set > # CONFIG_SND_KORG1212 is not set > # CONFIG_SND_MAESTRO3 is not set > # CONFIG_SND_MIXART is not set > # CONFIG_SND_NM256 is not set > # CONFIG_SND_PCXHR is not set > # CONFIG_SND_RIPTIDE is not set > # CONFIG_SND_RME32 is not set > # CONFIG_SND_RME96 is not set > # CONFIG_SND_RME9652 is not set > # CONFIG_SND_SONICVIBES is not set > # CONFIG_SND_TRIDENT is not set > # CONFIG_SND_VIA82XX is not set > # CONFIG_SND_VIA82XX_MODEM is not set > # CONFIG_SND_VX222 is not set > # CONFIG_SND_YMFPCI is not set > > # > # USB devices > # > # CONFIG_SND_USB_AUDIO is not set > # CONFIG_SND_USB_USX2Y is not set > > # > # SoC audio support > # > # CONFIG_SND_SOC is not set > > # > # Open Sound System > # > # CONFIG_SOUND_PRIME is not set > > # > # HID Devices > # > CONFIG_HID=y > # CONFIG_HID_DEBUG is not set > > # > # USB support > # > CONFIG_USB_ARCH_HAS_HCD=y > CONFIG_USB_ARCH_HAS_OHCI=y > CONFIG_USB_ARCH_HAS_EHCI=y > CONFIG_USB=y > # CONFIG_USB_DEBUG is not set > > # > # Miscellaneous USB options > # > CONFIG_USB_DEVICEFS=y > # CONFIG_USB_DYNAMIC_MINORS is not set > # CONFIG_USB_SUSPEND is not set > # CONFIG_USB_OTG is not set > > # > # USB Host Controller Drivers > # > CONFIG_USB_EHCI_HCD=y > # CONFIG_USB_EHCI_SPLIT_ISO is not set > # CONFIG_USB_EHCI_ROOT_HUB_TT is not set > # CONFIG_USB_EHCI_TT_NEWSCHED is not set > # CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set > # CONFIG_USB_ISP116X_HCD is not set > CONFIG_USB_OHCI_HCD=y > # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set > # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set > CONFIG_USB_OHCI_LITTLE_ENDIAN=y > # CONFIG_USB_UHCI_HCD is not set > # CONFIG_USB_SL811_HCD is not set > > # > # USB Device Class drivers > # > # CONFIG_USB_ACM is not set > # CONFIG_USB_PRINTER is not set > > # > # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' > # > > # > # may also be needed; see USB_STORAGE Help for more information > # > # CONFIG_USB_STORAGE is not set > # CONFIG_USB_LIBUSUAL is not set > > # > # USB Input Devices > # > # CONFIG_USB_HID is not set > > # > # USB HID Boot Protocol drivers > # > # CONFIG_USB_KBD is not set > # CONFIG_USB_MOUSE is not set > # CONFIG_USB_AIPTEK is not set > # CONFIG_USB_WACOM is not set > # CONFIG_USB_ACECAD is not set > # CONFIG_USB_KBTAB is not set > # CONFIG_USB_POWERMATE is not set > # CONFIG_USB_TOUCHSCREEN is not set > # CONFIG_USB_YEALINK is not set > # CONFIG_USB_XPAD is not set > # CONFIG_USB_ATI_REMOTE is not set > # CONFIG_USB_ATI_REMOTE2 is not set > # CONFIG_USB_KEYSPAN_REMOTE is not set > # CONFIG_USB_APPLETOUCH is not set > # CONFIG_USB_GTCO is not set > > # > # USB Imaging devices > # > # CONFIG_USB_MDC800 is not set > # CONFIG_USB_MICROTEK is not set > > # > # USB Network Adapters > # > # CONFIG_USB_CATC is not set > # CONFIG_USB_KAWETH is not set > # CONFIG_USB_PEGASUS is not set > # CONFIG_USB_RTL8150 is not set > # CONFIG_USB_USBNET_MII is not set > # CONFIG_USB_USBNET is not set > # CONFIG_USB_MON is not set > > # > # USB port drivers > # > > # > # USB Serial Converter support > # > # CONFIG_USB_SERIAL is not set > > # > # USB Miscellaneous drivers > # > # CONFIG_USB_EMI62 is not set > # CONFIG_USB_EMI26 is not set > # CONFIG_USB_ADUTUX is not set > # CONFIG_USB_AUERSWALD is not set > # CONFIG_USB_RIO500 is not set > # CONFIG_USB_LEGOTOWER is not set > # CONFIG_USB_LCD is not set > # CONFIG_USB_LED is not set > # CONFIG_USB_CYPRESS_CY7C63 is not set > # CONFIG_USB_CYTHERM is not set > # CONFIG_USB_PHIDGET is not set > # CONFIG_USB_IDMOUSE is not set > # CONFIG_USB_FTDI_ELAN is not set > # CONFIG_USB_APPLEDISPLAY is not set > # CONFIG_USB_SISUSBVGA is not set > # CONFIG_USB_LD is not set > # CONFIG_USB_TRANCEVIBRATOR is not set > # CONFIG_USB_TEST is not set > > # > # USB DSL modem support > # > > # > # USB Gadget Support > # > # CONFIG_USB_GADGET is not set > > # > # MMC/SD Card support > # > # CONFIG_MMC is not set > > # > # LED devices > # > # CONFIG_NEW_LEDS is not set > > # > # LED drivers > # > > # > # LED Triggers > # > > # > # InfiniBand support > # > # CONFIG_INFINIBAND is not set > > # > # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) > # > # CONFIG_EDAC is not set > > # > # Real Time Clock > # > # CONFIG_RTC_CLASS is not set > > # > # DMA Engine support > # > CONFIG_DMA_ENGINE=y > > # > # DMA Clients > # > CONFIG_NET_DMA=y > > # > # DMA Devices > # > # CONFIG_INTEL_IOATDMA is not set > > # > # Auxiliary Display support > # > > # > # Virtualization > # > # CONFIG_KVM is not set > > # > # File systems > # > CONFIG_EXT2_FS=y > CONFIG_EXT2_FS_XATTR=y > # CONFIG_EXT2_FS_POSIX_ACL is not set > # CONFIG_EXT2_FS_SECURITY is not set > # CONFIG_EXT2_FS_XIP is not set > CONFIG_EXT3_FS=y > CONFIG_EXT3_FS_XATTR=y > # CONFIG_EXT3_FS_POSIX_ACL is not set > # CONFIG_EXT3_FS_SECURITY is not set > # CONFIG_EXT4DEV_FS is not set > CONFIG_JBD=y > # CONFIG_JBD_DEBUG is not set > CONFIG_FS_MBCACHE=y > # CONFIG_REISERFS_FS is not set > # CONFIG_JFS_FS is not set > # CONFIG_FS_POSIX_ACL is not set > # CONFIG_XFS_FS is not set > # CONFIG_GFS2_FS is not set > # CONFIG_OCFS2_FS is not set > # CONFIG_MINIX_FS is not set > # CONFIG_ROMFS_FS is not set > CONFIG_INOTIFY=y > CONFIG_INOTIFY_USER=y > # CONFIG_QUOTA is not set > CONFIG_DNOTIFY=y > # CONFIG_AUTOFS_FS is not set > # CONFIG_AUTOFS4_FS is not set > # CONFIG_FUSE_FS is not set > > # > # CD-ROM/DVD Filesystems > # > CONFIG_ISO9660_FS=y > CONFIG_JOLIET=y > # CONFIG_ZISOFS is not set > CONFIG_UDF_FS=y > CONFIG_UDF_NLS=y > > # > # DOS/FAT/NT Filesystems > # > # CONFIG_MSDOS_FS is not set > # CONFIG_VFAT_FS is not set > # CONFIG_NTFS_FS is not set > > # > # Pseudo filesystems > # > CONFIG_PROC_FS=y > CONFIG_PROC_KCORE=y > CONFIG_PROC_SYSCTL=y > CONFIG_SYSFS=y > CONFIG_TMPFS=y > # CONFIG_TMPFS_POSIX_ACL is not set > # CONFIG_HUGETLBFS is not set > # CONFIG_HUGETLB_PAGE is not set > CONFIG_RAMFS=y > # CONFIG_CONFIGFS_FS is not set > > # > # Miscellaneous filesystems > # > # CONFIG_ADFS_FS is not set > # CONFIG_AFFS_FS is not set > # CONFIG_HFS_FS is not set > # CONFIG_HFSPLUS_FS is not set > # CONFIG_BEFS_FS is not set > # CONFIG_BFS_FS is not set > # CONFIG_EFS_FS is not set > # CONFIG_CRAMFS is not set > # CONFIG_VXFS_FS is not set > # CONFIG_HPFS_FS is not set > # CONFIG_QNX4FS_FS is not set > # CONFIG_SYSV_FS is not set > # CONFIG_UFS_FS is not set > > # > # Network File Systems > # > # CONFIG_NFS_FS is not set > # CONFIG_NFSD is not set > # CONFIG_SMB_FS is not set > # CONFIG_CIFS is not set > # CONFIG_NCP_FS is not set > # CONFIG_CODA_FS is not set > # CONFIG_AFS_FS is not set > # CONFIG_9P_FS is not set > > # > # Partition Types > # > # CONFIG_PARTITION_ADVANCED is not set > CONFIG_MSDOS_PARTITION=y > > # > # Native Language Support > # > CONFIG_NLS=y > CONFIG_NLS_DEFAULT="iso8859-1" > CONFIG_NLS_CODEPAGE_437=y > # CONFIG_NLS_CODEPAGE_737 is not set > # CONFIG_NLS_CODEPAGE_775 is not set > # CONFIG_NLS_CODEPAGE_850 is not set > # CONFIG_NLS_CODEPAGE_852 is not set > # CONFIG_NLS_CODEPAGE_855 is not set > # CONFIG_NLS_CODEPAGE_857 is not set > # CONFIG_NLS_CODEPAGE_860 is not set > # CONFIG_NLS_CODEPAGE_861 is not set > # CONFIG_NLS_CODEPAGE_862 is not set > # CONFIG_NLS_CODEPAGE_863 is not set > # CONFIG_NLS_CODEPAGE_864 is not set > # CONFIG_NLS_CODEPAGE_865 is not set > # CONFIG_NLS_CODEPAGE_866 is not set > # CONFIG_NLS_CODEPAGE_869 is not set > # CONFIG_NLS_CODEPAGE_936 is not set > # CONFIG_NLS_CODEPAGE_950 is not set > # CONFIG_NLS_CODEPAGE_932 is not set > # CONFIG_NLS_CODEPAGE_949 is not set > # CONFIG_NLS_CODEPAGE_874 is not set > # CONFIG_NLS_ISO8859_8 is not set > # CONFIG_NLS_CODEPAGE_1250 is not set > # CONFIG_NLS_CODEPAGE_1251 is not set > CONFIG_NLS_ASCII=y > CONFIG_NLS_ISO8859_1=y > # CONFIG_NLS_ISO8859_2 is not set > # CONFIG_NLS_ISO8859_3 is not set > # CONFIG_NLS_ISO8859_4 is not set > # CONFIG_NLS_ISO8859_5 is not set > # CONFIG_NLS_ISO8859_6 is not set > # CONFIG_NLS_ISO8859_7 is not set > # CONFIG_NLS_ISO8859_9 is not set > # CONFIG_NLS_ISO8859_13 is not set > # CONFIG_NLS_ISO8859_14 is not set > CONFIG_NLS_ISO8859_15=y > # CONFIG_NLS_KOI8_R is not set > # CONFIG_NLS_KOI8_U is not set > CONFIG_NLS_UTF8=y > > # > # Distributed Lock Manager > # > # CONFIG_DLM is not set > > # > # Instrumentation Support > # > # CONFIG_PROFILING is not set > # CONFIG_KPROBES is not set > > # > # Kernel hacking > # > CONFIG_TRACE_IRQFLAGS_SUPPORT=y > # CONFIG_PRINTK_TIME is not set > # CONFIG_ENABLE_MUST_CHECK is not set > # CONFIG_MAGIC_SYSRQ is not set > # CONFIG_UNUSED_SYMBOLS is not set > # CONFIG_DEBUG_FS is not set > # CONFIG_HEADERS_CHECK is not set > # CONFIG_DEBUG_KERNEL is not set > CONFIG_LOG_BUF_SHIFT=15 > CONFIG_DEBUG_BUGVERBOSE=y > CONFIG_EARLY_PRINTK=y > CONFIG_X86_FIND_SMP_CONFIG=y > CONFIG_X86_MPPARSE=y > CONFIG_DOUBLEFAULT=y > > # > # Security options > # > # CONFIG_KEYS is not set > # CONFIG_SECURITY is not set > > # > # Cryptographic options > # > # CONFIG_CRYPTO is not set > > # > # Library routines > # > # CONFIG_CRC_CCITT is not set > # CONFIG_CRC16 is not set > # CONFIG_CRC32 is not set > # CONFIG_LIBCRC32C is not set > CONFIG_PLIST=y > CONFIG_HAS_IOMEM=y > CONFIG_HAS_IOPORT=y > CONFIG_GENERIC_HARDIRQS=y > CONFIG_GENERIC_IRQ_PROBE=y > CONFIG_GENERIC_PENDING_IRQ=y > CONFIG_X86_SMP=y > CONFIG_X86_HT=y > CONFIG_X86_BIOS_REBOOT=y > CONFIG_X86_TRAMPOLINE=y > CONFIG_KTIME_SCALAR=y > > > > Here is ver_linux output: > > > > Linux localhost 2.6.20-gentoo-r9 #1 SMP Fri Jul 20 15:22:51 PDT 2007 > i686 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 AuthenticAMD > GNU/Linux > > Gnu C 4.2.0 > Gnu make 3.81 > binutils 2.17 > util-linux 2.12r > mount 2.12r > module-init-tools 3.2.2 > e2fsprogs 1.40.2 > Linux C Library > libc.2.6 > Dynamic linker (ldd) 2.6 > Procps 3.2.7 > Net-tools 1.60 > Kbd 1.13 > Sh-utils 6.9 > udev 113 > wireless-tools 29 > Modules Loaded fglrx > > > > Here is /proc/cpuinfo: > > > > processor : 0 > vendor_id : AuthenticAMD > cpu family : 15 > model : 104 > model name : AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 > stepping : 1 > cpu MHz : 1700.000 > cache size : 256 KB > physical id : 0 > siblings : 2 > core id : 0 > cpu cores : 2 > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 1 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge > mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext > fxsr_opt lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8legacy > ts fid vid ttp tm stc [6] > bogomips : 3394.66 > clflush size : 64 > > processor : 1 > vendor_id : AuthenticAMD > cpu family : 15 > model : 104 > model name : AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 > stepping : 1 > cpu MHz : 1700.000 > cache size : 256 KB > physical id : 0 > siblings : 2 > core id : 1 > cpu cores : 2 > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 1 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge > mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext > fxsr_opt lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8legacy > ts fid vid ttp tm stc [6] > bogomips : 3391.71 > clflush size : 64 > > > > Here is lspci -vvv: > > > > 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10) > Subsystem: Dell Unknown device 01f5 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >> TAbort- <TAbort+ <MAbort+ >SERR- <PERR- > Latency: 64 > > 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 > [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >> TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 > I/O behind bridge: 00009000-00009fff > Memory behind bridge: c0100000-c01fffff > Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff > Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >> TAbort- <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- > Capabilities: [44] HyperTransport: MSI Mapping > Capabilities: [b0] Subsystem: ATI Technologies Inc RS480 PCI Bridge > > 00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 > [Normal decode]) > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 32 bytes > Bus: primary=00, secondary=02, subordinate=04, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express Root Port (Slot+) IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, > ExtTag+ > Device: Latency L0s <64ns, L1 <1us > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, > Port 247 > Link: Latency L0s <64ns, L1 <1us > Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- > Link: Speed 2.5Gb/s, Width x16 > Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ > Surpise+ > Slot: Number 0, PowerLimit 0.000000 > Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > Slot: AttnInd Off, PwrInd Off, Power- > Root: Correctable- Non-Fatal- Fatal- PME- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- > Queue=0/0 Enable- > Address: 00000000 Data: 0000 > Capabilities: [b0] Subsystem: ATI Technologies Inc Unknown device > 5950 > Capabilities: [b8] HyperTransport: MSI Mapping > > 00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 > [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 32 bytes > Bus: primary=00, secondary=05, subordinate=07, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: c0200000-c02fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express Root Port (Slot+) IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, > ExtTag+ > Device: Latency L0s <64ns, L1 <1us > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3 > Link: Latency L0s <64ns, L1 <1us > Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- > Link: Speed 2.5Gb/s, Width x1 > Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ > Surpise+ > Slot: Number 0, PowerLimit 25.000000 > Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > Slot: AttnInd Off, PwrInd Off, Power- > Root: Correctable- Non-Fatal- Fatal- PME- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- > Queue=0/0 Enable- > Address: 00000000 Data: 0000 > Capabilities: [b0] Subsystem: ATI Technologies Inc Unknown device > 5950 > Capabilities: [b8] HyperTransport: MSI Mapping > > 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA > (prog-if 01 [AHCI 1.0]) > Subsystem: Dell Unknown device 01f5 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >> TAbort+ <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 > Interrupt: pin A routed to IRQ 18 > Region 0: I/O ports at 8438 [size=8] > Region 1: I/O ports at 8454 [size=4] > Region 2: I/O ports at 8430 [size=8] > Region 3: I/O ports at 8450 [size=4] > Region 4: I/O ports at 8400 [size=16] > Region 5: Memory at c0004000 (32-bit, non-prefetchable) [size=1K] > Capabilities: [60] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [70] #12 [0010] > > 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) > (prog-if 10 [OHCI]) > Subsystem: Dell Unknown device 01f5 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >> TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 17 > Region 0: Memory at c0005000 (32-bit, non-prefetchable) [size=4K] > > 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) > (prog-if 10 [OHCI]) > Subsystem: Dell Unknown device 01f5 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >> TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin B routed to IRQ 20 > Region 0: Memory at c0006000 (32-bit, non-prefetchable) [size=4K] > > 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) > (prog-if 10 [OHCI]) > Subsystem: Dell Unknown device 01f5 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >> TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin C routed to IRQ 21 > Region 0: Memory at c0007000 (32-bit, non-prefetchable) [size=4K] > > 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) > (prog-if 10 [OHCI]) > Subsystem: Dell Unknown device 01f5 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >> TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin B routed to IRQ 20 > Region 0: Memory at c0008000 (32-bit, non-prefetchable) [size=4K] > > 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) > (prog-if 10 [OHCI]) > Subsystem: Dell Unknown device 01f5 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >> TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin C routed to IRQ 21 > Region 0: Memory at c0009000 (32-bit, non-prefetchable) [size=4K] > > 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller > (EHCI) (prog-if 20 [EHCI]) > Subsystem: Dell Unknown device 01f5 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >> TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin D routed to IRQ 19 > Region 0: Memory at c0004400 (32-bit, non-prefetchable) [size=256] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Bridge: PM- B3+ > Capabilities: [e4] Debug port > > 00:14.0 SMBus: ATI Technologies Inc SB600 SMBus (rev 13) > Subsystem: Dell Unknown device 01f5 > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >> TAbort- <TAbort- <MAbort- >SERR- <PERR- > Region 0: I/O ports at 8410 [size=16] > Region 1: Memory at c0004800 (32-bit, non-prefetchable) [size=1K] > Capabilities: [b0] HyperTransport: MSI Mapping > > 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE (prog-if 8a > [Master SecP PriP]) > Subsystem: Dell Unknown device 01f5 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >> TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 17 > Region 0: I/O ports at 01f0 [size=8] > Region 1: I/O ports at 03f4 [size=1] > Region 2: I/O ports at 0170 [size=8] > Region 3: I/O ports at 0374 [size=1] > Region 4: I/O ports at 8420 [size=16] > Capabilities: [70] Message Signalled Interrupts: Mask- 64bit- > Queue=0/0 Enable- > Address: 00000000 Data: 0000 > > 00:14.2 Audio device: ATI Technologies Inc SB600 Azalia > Subsystem: Dell Unknown device 01f5 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin ? routed to IRQ 17 > Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=16K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ > Queue=0/0 Enable- > Address: 0000000000000000 Data: 0000 > > 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge > Subsystem: Dell Unknown device 01f5 > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >> TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > > 00:14.4 PCI bridge: ATI Technologies Inc SB600 PCI to PCI Bridge > (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >> TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 > Bus: primary=00, secondary=08, subordinate=0a, sec-latency=64 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: c0300000-c03fffff > Prefetchable memory behind bridge: fff00000-000fffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >> TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > > 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] HyperTransport Technology Configuration > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Capabilities: [80] HyperTransport: Host or Secondary Interface > !!! Possibly incomplete decoding > Command: WarmRst+ DblEnd- > Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- > <CRCErr=8 > Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit > Revision ID: 1.02 > > 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] Address Map > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > > 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] DRAM Controller > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > > 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] Miscellaneous Control > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Capabilities: [f0] #0f [0010] > > 01:05.0 VGA compatible controller: ATI Technologies Inc RS485 [Radeon > Xpress 1100 IGP] (prog-if 00 [VGA]) > Subsystem: Dell Unknown device 01f5 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >> TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 255 (2000ns min), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 20 > Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M] > Region 1: I/O ports at 9000 [size=256] > Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K] > [virtual] Expansion ROM at c0120000 [disabled] [size=128K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 05:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan > mini-PCI (rev 01) > Subsystem: Dell Unknown device 0007 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at c0200000 (32-bit, non-prefetchable) [size=16K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- > Queue=0/0 Enable- > Address: 00000000 Data: 0000 > Capabilities: [d0] Express Legacy Endpoint IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, > ExtTag+ > Device: Latency L0s <4us, L1 unlimited > Device: AtnBtn- AtnInd- PwrInd- > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0 > Link: Latency L0s <4us, L1 <64us > Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- > Link: Speed 2.5Gb/s, Width x1 > Capabilities: [100] Advanced Error Reporting > Capabilities: [13c] Virtual Channel > > 08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX > (rev 02) > Subsystem: Dell Unknown device 01f5 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at c0300000 (32-bit, non-prefetchable) [size=8K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > > 08:01.0 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 > SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) > Subsystem: Dell Unknown device 01f5 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 > Interrupt: pin B routed to IRQ 11 > Region 0: Memory at c0302800 (32-bit, non-prefetchable) [size=256] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > > 08:01.1 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 01) > Subsystem: Dell Unknown device 01f5 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >> TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin B routed to IRQ 9 > Region 0: Memory at c0302c00 (32-bit, non-prefetchable) [size=256] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > > > > Here is /proc/ioports: > > > > 0000-001f : dma1 > 0020-0021 : pic1 > 0040-0043 : timer0 > 0050-0053 : timer1 > 0060-006f : keyboard > 0080-008f : dma page reg > 00a0-00a1 : pic2 > 00c0-00df : dma2 > 00f0-00ff : fpu > 0170-0177 : 0000:00:14.1 > 01f0-01f7 : 0000:00:14.1 > 01f0-01f7 : ide0 > 0376-0376 : 0000:00:14.1 > 03c0-03df : vga+ > 03c0-03df : vesafb > 03f6-03f6 : 0000:00:14.1 > 03f6-03f6 : ide0 > 0cf8-0cff : PCI conf1 > 1080-1080 : motherboard > 8000-805f : motherboard > 8000-8003 : ACPI PM1a_EVT_BLK > 8004-8005 : ACPI PM1a_CNT_BLK > 8008-800b : ACPI PM_TMR > 8010-8015 : ACPI CPU throttle > 8020-8027 : ACPI GPE0_BLK > 8200-8200 : ACPI PM2_CNT_BLK > 8204-8207 : ACPI PM1b_EVT_BLK > 8400-840f : 0000:00:12.0 > 8400-840f : ahci > 8410-841f : 0000:00:14.0 > 8420-842f : 0000:00:14.1 > 8420-8427 : ide0 > 8430-8437 : 0000:00:12.0 > 8430-8437 : ahci > 8438-843f : 0000:00:12.0 > 8438-843f : ahci > 8450-8453 : 0000:00:12.0 > 8450-8453 : ahci > 8454-8457 : 0000:00:12.0 > 8454-8457 : ahci > 9000-9fff : PCI Bus #01 > 9000-90ff : 0000:01:05.0 > > > > Here is /proc/iomem: > > > > 00000000-0009dbff : System RAM > 0009dc00-0009ffff : reserved > 000a0000-000bffff : Video RAM area > 000c0000-000ccfff : Video ROM > 000cd000-000cdfff : Adapter ROM > 000f0000-000fffff : System ROM > 00100000-37e6ffff : System RAM > 00100000-003d480a : Kernel code > 003d480b-004c3057 : Kernel data > 37e70000-37e7ffff : ACPI Tables > 37e80000-37efffff : ACPI Non-volatile Storage > 37f00000-3fffffff : reserved > c0000000-c0003fff : 0000:00:14.2 > c0000000-c0003fff : ICH HD audio > c0004000-c00043ff : 0000:00:12.0 > c0004000-c00043ff : ahci > c0004400-c00044ff : 0000:00:13.5 > c0004400-c00044ff : ehci_hcd > c0004800-c0004bff : 0000:00:14.0 > c0005000-c0005fff : 0000:00:13.0 > c0005000-c0005fff : ohci_hcd > c0006000-c0006fff : 0000:00:13.1 > c0006000-c0006fff : ohci_hcd > c0007000-c0007fff : 0000:00:13.2 > c0007000-c0007fff : ohci_hcd > c0008000-c0008fff : 0000:00:13.3 > c0008000-c0008fff : ohci_hcd > c0009000-c0009fff : 0000:00:13.4 > c0009000-c0009fff : ohci_hcd > c0100000-c01fffff : PCI Bus #01 > c0100000-c010ffff : 0000:01:05.0 > c0120000-c013ffff : 0000:01:05.0 > c0200000-c02fffff : PCI Bus #05 > c0200000-c0203fff : 0000:05:00.0 > c0300000-c03fffff : PCI Bus #08 > c0300000-c0301fff : 0000:08:00.0 > c0300000-c0301fff : b44 > c0302800-c03028ff : 0000:08:01.0 > c0302c00-c0302cff : 0000:08:01.1 > c8000000-cfffffff : PCI Bus #01 > c8000000-cfffffff : 0000:01:05.0 > c8000000-c8ffffff : vesafb > e0000000-efffffff : reserved > fec00000-fec0ffff : reserved > fee00000-fee00fff : reserved > fff80000-ffffffff : reserved
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |