lkml.org 
[lkml]   [2007]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 0/6] Convert all tasklets to workqueues
On 6/28/07, Steven Rostedt <rostedt@goodmis.org> wrote:
> On Thu, 28 Jun 2007, Dan Williams wrote:
> > >
> > Unfortunately setting the thread to real time priority makes
> > throughput slightly worse. Instead of floating around 35MB/s the
> > resync speed is stuck around 30MB/s:
>
> That is really strange. If you higher the prio of the work queue it
> gets worst? Something really strange is happening here? Are you using
> CONFIG_PREEMPT?
>
Everything thus far has been CONFIG_PREEMPT=n (the default for this platform).

With CONFIG_PREEMPT=y the resync is back in the 50MB/s range.

[iop-adma: hi-prio workqueue, CONFIG_PREEMPT=y]
iq81340mc:~# cat /proc/mdstat
Personalities : [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
md0 : active raid5 sdd[4] sdc[2] sdb[1] sda[0]
468872448 blocks level 5, 64k chunk, algorithm 2 [4/3] [UUU_]
[=>...................] recovery = 5.8% (9136404/156290816)
finish=46.1min speed=53161K/sec

The tasklet configuration stays in 50MB/s ballpark, and the default
priority (nice -5) workqueue case remains in the 30's with
CONFIG_PREEMPT=n.

--
Dan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-06-28 23:29    [W:0.145 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site