lkml.org 
[lkml]   [2007]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Dual slot PCI riser messes up ivtv
From
Date
Islam Amer <pharon@gmail.com> writes:

> First the riser card is a dual slot one , with a chip on it so I assumed
> it is active.

Perhaps REQ/GNT arbiter. A PCI-PCI bridge is a 100+ pin chip.

> Third : The bug lies in the situation where the PVR-150 card is in the
> upper slot and the DVB card is in the lower slot, in which case the DVB
> card does not work. That was the dmesg output I posted earlier.

Interesting, the lower slot is probably wired directly to edge
connector so it should work. The upper connector should be the
problematic.
--
Krzysztof Halasa
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-06-24 18:27    [W:0.038 / U:2.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site