Messages in this thread | | | Subject | RE: Broadcom (bnx2) on PE1950/2950 failure | Date | Fri, 22 Jun 2007 15:20:07 -0400 | From | "Fortier,Vincent [Montreal]" <> |
| |
> Huh? eth0 and eth1 are the e1000 adapters, eth3 (and > presumably eth2) are the bnx2 adapters..
Got it... Almost...
There was a confusion between /etc/udev/rules.d/z25_persistent-net.rules, the fact that bnx2 was in the initrd image but not e1000.
So I edited /etc/udev/rules.d/z25_persistent-net.rules to set the order I wanted using directly the PCI ID as provided by the lspci -vvv: [root@urpdev1 /etc]# lspci -vvv | grep Ethernet 05:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) 0e:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) 0e:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
[root@urpdev1 rules.d]# cat /etc/udev/rules.d/z25_persistent-net.rules # This file was automatically generated by the /lib/udev/write_net_rules # program, probably run by the persistent-net-generator.rules rules file. # # You can modify it, as long as you keep each rule on a single line. # MAC addresses must be written in lowercase.
SUBSYSTEM=="net", DRIVERS=="?*", KERNELS=="0000:05:00.0", NAME="eth0" SUBSYSTEM=="net", DRIVERS=="?*", KERNELS=="0000:09:00.0", NAME="eth1" SUBSYSTEM=="net", DRIVERS=="?*", KERNELS=="0000:0e:00.0", NAME="eth2" SUBSYSTEM=="net", DRIVERS=="?*", KERNELS=="0000:0e:00.1", NAME="eth3"
And recreated the initrd image after having set which module not to forget... And it's order: [root@urpdev1 /etc]# cat /etc/initramfs-tools/modules # List of modules that you want to include in your initramfs. # # Syntax: module_name [args ...] # # You must run update-initramfs(8) to effect this change. # # Examples: # # raid1 # sd_mod bnx2 e1000
Here is the output of the dmesg with now the appropriate order: [root@urpdev1 /etc]# dmesg | grep -i eth [ 120.685696] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.5.8.1 (May 7, 2007) [ 120.703846] eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 17, node addr 0019b9c8eedc [ 120.735350] eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 0019b9c8eede [ 120.921403] e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection [ 121.069025] e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection [ 267.720475] bnx2: eth0: using MSI [ 270.832235] bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
But still, there is a problem with the second Broadcom port (eth1): [root@urpdev1 /etc]# mii-tool eth0: negotiated 100baseTx-FD flow-control, link ok SIOCGMIIPHY on 'eth1' failed: Resource temporarily unavailable eth2: negotiated 100baseTx-FD flow-control, link ok eth3: negotiated 100baseTx-FD flow-control, link ok
I don't get it?
Help appreciated.
- vin - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |