lkml.org 
[lkml]   [2007]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [RFC][PATCH -mm 1/7] PM: Remove pm_parent from struct dev_pm_info
Date
On Monday, 11 June 2007 20:52, Rafael J. Wysocki wrote:
> On Monday, 11 June 2007 17:59, Alan Stern wrote:
> > On Mon, 11 Jun 2007, Rafael J. Wysocki wrote:
> >
> > > From: Rafael J. Wysocki <rjw@sisk.pl>
> > >
> > > The pm_parent member of struct dev_pm_info (defined in include/linux/pm.h) is
> > > only used to check if the device's parent is in the right state while the
> > > device is being suspended or resumed. However, this can be done just as well
> > > with the help of the parent pointer in struct device, so pm_parent can be
> > > removed along with some code that handles it.
> >
> > > @@ -61,21 +40,26 @@ int device_pm_add(struct device * dev)
> > > kobject_name(&dev->kobj));
> > > mutex_lock(&dpm_list_mtx);
> > > list_add_tail(&dev->power.entry, &dpm_active);
> > > - device_pm_set_parent(dev, dev->parent);
> > > - if ((error = dpm_sysfs_add(dev)))
> > > + /*
> > > + * The device's parent must not be released until the device itself is
> > > + * removed from the dpm_active list.
> > > + */
> > > + get_device(dev->parent);
> > > + error = dpm_sysfs_add(dev);
> > > + if (error)
> > > list_del(&dev->power.entry);
> > > mutex_unlock(&dpm_list_mtx);
> > > return error;
> > > }
> >
> > The error pathway here does an unbalanced get_device on dev->parent.
> >
> > Anyway, I don't think you need to do this get_device at all (or the
> > coresponding put in device_pm_remove). As long as a device is
> > registered it retains a reference to its parent, and unregistration
> > always calls device_pm_remove.
>
> Yes, I've just come to the same conclusion. I'll remove the
> get_device(dev->parent) and the correspondint put_device(dev->parent)
> from device_pm_remove().

OK

The updated patch follows.

Greetings,
Rafael

---
From: Rafael J. Wysocki <rjw@sisk.pl>

The pm_parent member of struct dev_pm_info (defined in include/linux/pm.h) is
only used to check if the device's parent is in the right state while the
device is being suspended or resumed. However, this can be done just as well
with the help of the parent pointer in struct device, so pm_parent can be
removed along with some code that handles it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
drivers/base/power/main.c | 30 ++++--------------------------
drivers/base/power/resume.c | 7 +++----
drivers/base/power/suspend.c | 7 +++----
include/linux/pm.h | 3 ---
4 files changed, 10 insertions(+), 37 deletions(-)

Index: linux-2.6.22-rc4/drivers/base/power/main.c
===================================================================
--- linux-2.6.22-rc4.orig/drivers/base/power/main.c 2007-06-10 19:35:49.000000000 +0200
+++ linux-2.6.22-rc4/drivers/base/power/main.c 2007-06-11 21:05:10.000000000 +0200
@@ -31,28 +31,7 @@ DEFINE_MUTEX(dpm_list_mtx);

int (*platform_enable_wakeup)(struct device *dev, int is_on);

-
-/**
- * device_pm_set_parent - Specify power dependency.
- * @dev: Device who needs power.
- * @parent: Device that supplies power.
- *
- * This function is used to manually describe a power-dependency
- * relationship. It may be used to specify a transversal relationship
- * (where the power supplier is not the physical (or electrical)
- * ancestor of a specific device.
- * The effect of this is that the supplier will not be powered down
- * before the power dependent.
- */
-
-void device_pm_set_parent(struct device * dev, struct device * parent)
-{
- put_device(dev->power.pm_parent);
- dev->power.pm_parent = get_device(parent);
-}
-EXPORT_SYMBOL_GPL(device_pm_set_parent);
-
-int device_pm_add(struct device * dev)
+int device_pm_add(struct device *dev)
{
int error;

@@ -61,21 +40,20 @@ int device_pm_add(struct device * dev)
kobject_name(&dev->kobj));
mutex_lock(&dpm_list_mtx);
list_add_tail(&dev->power.entry, &dpm_active);
- device_pm_set_parent(dev, dev->parent);
- if ((error = dpm_sysfs_add(dev)))
+ error = dpm_sysfs_add(dev);
+ if (error)
list_del(&dev->power.entry);
mutex_unlock(&dpm_list_mtx);
return error;
}

-void device_pm_remove(struct device * dev)
+void device_pm_remove(struct device *dev)
{
pr_debug("PM: Removing info for %s:%s\n",
dev->bus ? dev->bus->name : "No Bus",
kobject_name(&dev->kobj));
mutex_lock(&dpm_list_mtx);
dpm_sysfs_remove(dev);
- put_device(dev->power.pm_parent);
list_del_init(&dev->power.entry);
mutex_unlock(&dpm_list_mtx);
}
Index: linux-2.6.22-rc4/drivers/base/power/resume.c
===================================================================
--- linux-2.6.22-rc4.orig/drivers/base/power/resume.c 2007-06-10 19:35:49.000000000 +0200
+++ linux-2.6.22-rc4/drivers/base/power/resume.c 2007-06-11 21:04:44.000000000 +0200
@@ -29,12 +29,11 @@ int resume_device(struct device * dev)

down(&dev->sem);

- if (dev->power.pm_parent
- && dev->power.pm_parent->power.power_state.event) {
+ if (dev->parent && dev->parent->power.power_state.event) {
dev_err(dev, "PM: resume from %d, parent %s still %d\n",
dev->power.power_state.event,
- dev->power.pm_parent->bus_id,
- dev->power.pm_parent->power.power_state.event);
+ dev->parent->bus_id,
+ dev->parent->power.power_state.event);
}

if (dev->bus && dev->bus->resume) {
Index: linux-2.6.22-rc4/drivers/base/power/suspend.c
===================================================================
--- linux-2.6.22-rc4.orig/drivers/base/power/suspend.c 2007-06-10 19:35:49.000000000 +0200
+++ linux-2.6.22-rc4/drivers/base/power/suspend.c 2007-06-11 21:04:44.000000000 +0200
@@ -55,13 +55,12 @@ int suspend_device(struct device * dev,
dev_dbg(dev, "PM: suspend %d-->%d\n",
dev->power.power_state.event, state.event);
}
- if (dev->power.pm_parent
- && dev->power.pm_parent->power.power_state.event) {
+ if (dev->parent && dev->parent->power.power_state.event) {
dev_err(dev,
"PM: suspend %d->%d, parent %s already %d\n",
dev->power.power_state.event, state.event,
- dev->power.pm_parent->bus_id,
- dev->power.pm_parent->power.power_state.event);
+ dev->parent->bus_id,
+ dev->parent->power.power_state.event);
}

dev->power.prev_state = dev->power.power_state;
Index: linux-2.6.22-rc4/include/linux/pm.h
===================================================================
--- linux-2.6.22-rc4.orig/include/linux/pm.h 2007-06-10 19:35:49.000000000 +0200
+++ linux-2.6.22-rc4/include/linux/pm.h 2007-06-11 21:04:44.000000000 +0200
@@ -237,13 +237,10 @@ struct dev_pm_info {
unsigned should_wakeup:1;
pm_message_t prev_state;
void * saved_state;
- struct device * pm_parent;
struct list_head entry;
#endif
};

-extern void device_pm_set_parent(struct device * dev, struct device * parent);
-
extern int device_power_down(pm_message_t state);
extern void device_power_up(void);
extern void device_resume(void);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2007-06-11 21:53    [W:0.038 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site