lkml.org 
[lkml]   [2007]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: 2.6.22-rc1-mm1 [cannot change thermal trip points]
Date
On Thursday 17 May 2007 09:36, Maciej Rutecki wrote:

> Many people need change trippoints, for example I have:
>
> cat /proc/acpi/thermal_zone/TZ0/trip_points | grep critical
> critical (S5): 256 C
>
> I _must_ change it to below 105 C, or edit DSDT table (too difficult to
> me). I cannot use this kernel, when trip points are read only.

What bad things happen if you leave the critical trip point at 256?
Do you find that you can drive the temperature over 105 and
the system fails to shut down?

-Len

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-05-17 21:15    [W:0.245 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site