lkml.org 
[lkml]   [2007]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] libata: implement ata_wait_after_reset()
On Wed, May 16, 2007 at 06:44:53PM +0200, Tejun Heo wrote:
> This patch is against the current libata-dev#upstream +
> pata_scc-fix-build-failure[1].
>
> [1] http://article.gmane.org/gmane.linux.kernel/528405
>
> Paul, please verify this fixes your problem. You can skip the
> pata_scc patch, it will cause pata_scc part to be rejected but doesn't
> matter.
>
Yes, this does get iVDR detection working again. The only problem seems
to be that every now and then I end up with this:

scsi0 : sata_sil
scsi1 : sata_sil
ata1: SATA max UDMA/100 cmd 0xfd000280 ctl 0xfd00028a bmdma 0xfd000200 irq 0
ata2: SATA max UDMA/100 cmd 0xfd0002c0 ctl 0xfd0002ca bmdma 0xfd000208 irq 0
ata1: device not ready (errno=-19), forcing hardreset
ata1: COMRESET failed (errno=-19)
ata1: reset failed (errno=-19), retrying in 9 secs
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)

So at least the drive detection works, but it would be nice not to
trigger this 9-second retry.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-05-17 02:55    [W:0.069 / U:1.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site