Messages in this thread | | | Date | Mon, 19 Mar 2007 06:31:51 +0100 | From | Willy Tarreau <> | Subject | Re: 1000xf bus problem |
| |
On Sun, Mar 18, 2007 at 11:20:09PM -0600, Robert Hancock wrote: > Greg.Chandler@wellsfargo.com wrote: > >lspci -v shows the message below, and I am moving files between systems, > >{from RAMdisk to RAMdisk} on idle machines. > >The transfer rate is concurrent with just under the max throughput > >capable on a 64-bit/66Mhz PCI socket. > > I think you miscalculate, that bus can transfer 532 MB/sec, Gigabit > Ethernet tops out at 125 MB/sec at absolute maximum and it's difficult > to achieve that in practice.
On TCP payload, you should achieve 118.66 * 10^6 bytes/s ~= 113 MB/s. This is what you should observe with FTP or netcat for instance. On local networks, it is perfectly attainable, I do this every day. If you are far from this, check both sides link status with ethtool, and ensure that you do not have wiring problems. It is usually very easy to fill the wire with an e1000.
Also, it would be interesting to check the other side. What card does it have, what bus, what driver ? And what software or tests are you using to conclude that you're limited by the bus ?
Regards, Willy
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |