lkml.org 
[lkml]   [2007]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Loading both the pata_atiixp and the ahci driver causes problems
Tejun Heo wrote:
> Jon Masters wrote:
>> Chuck Ebbert wrote:
>>
>>> If you try to load both the pata_atiixp and the ahci driver
>>> (for the same ATI SB600 adapter), very strange things happen.
>>> The AHCI driver churns for three minutes or so, spewing
>>> messages like this, then nothing works:
>>>
>>> <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>>> <4>ata3.00: qc timeout (cmd 0xec)
>>> <4>ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104)
>>> Shouldn't it be able to tell the device has already been
>>> claimed by some other driver?
>> One would assume it'd fail to grab the PCI IO ranges twice? I haven't
>> looked at the code but I have seen this bug mentioned elsewhere so I
>> might well end up having to do that yet :-)
>
> Dunno much about sb600 but ahci and pata_atiixp are probably using
> separate IO regions && separate PCI functions.
>
> Conke, care to educate us a bit here?
>

The really funny part is that it works for some if they use:

pci=noacpi,irqpoll


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-03-18 22:25    [W:0.034 / U:0.764 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site