Messages in this thread | | | From | Christian <> | Subject | Re: [BUG 2.6.21-rc3-git9] SATA NCQ failure with Samsum HD401LJ | Date | Sun, 18 Mar 2007 21:31:00 +0100 |
| |
On Sunday 18 March 2007 06:43:09 you wrote: > Christian wrote: > >> This does indeed look like a drive side issue to me (the controller is > >> reporting CPBs with response flags 2 which as far as I can tell > >> indicates it's still waiting for the drive to complete the request). > > > > I have been using this hw-config (SATA II, NCQ) since the nvidia ADMA > > support made it in the -mm kernel (maybe around 2.6.19-mm? or even > > earlyer). I'm seeing this problem excessively since I upgraded to > > 2.6.21-rc3-mm1. I think something got broken recently... > > Can you post the result of "hdparm -I /dev/sdX"?
Output generated on 2.6.21-rc3-mm1 #3 SMP PREEMPT
user@ubuntu:~$ sudo hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media Model Number: SAMSUNG HD401LJ Serial Number: S0HVJ1FL900207 Firmware Revision: ZZ100-15 Standards: Used: ATA/ATAPI-7 T13 1532D revision 4a Supported: 7 6 5 4 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 781422768 device size with M = 1024*1024: 381554 MBytes device size with M = 1000*1000: 400088 MBytes (400 GB) Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Recommended acoustic management value: 254, current value: 0 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 udma7 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE SET_MAX security extension Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test * General Purpose Logging feature set * SATA-I signaling speed (1.5Gb/s) * SATA-II signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters DMA Setup Auto-Activate optimization Device-initiated interface power management * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Long Sector Access (AC1) * SCT LBA Segment Access (AC2) * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count supported: enhanced erase 228min for SECURITY ERASE UNIT. 228min for ENHANCED SECURITY ERASE UNIT. Checksum: correct
user@ubuntu:~$ sudo hdparm -I /dev/sdb
/dev/sdb:
ATA device, with non-removable media Model Number: SAMSUNG SP2504C Serial Number: S09QJ1LYC06381 Firmware Revision: VT100-33 Standards: Used: ATA/ATAPI-7 T13 1532D revision 4a Supported: 7 6 5 4 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 488397168 device size with M = 1024*1024: 238475 MBytes device size with M = 1000*1000: 250059 MBytes (250 GB) Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Recommended acoustic management value: 254, current value: 254 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 udma7 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE SET_MAX security extension * Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test * General Purpose Logging feature set * SATA-I signaling speed (1.5Gb/s) * SATA-II signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters DMA Setup Auto-Activate optimization Device-initiated interface power management * Software settings preservation Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count supported: enhanced erase 120min for SECURITY ERASE UNIT. 120min for ENHANCED SECURITY ERASE UNIT. Checksum: correct
user@ubuntu:~$ sudo hdparm -I /dev/sdc
/dev/sdc:
ATA device, with non-removable media Model Number: SAMSUNG SP2504C Serial Number: S09QJ10L420645 Firmware Revision: VT100-41 Standards: Used: ATA/ATAPI-7 T13 1532D revision 4a Supported: 7 6 5 4 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 488397168 device size with M = 1024*1024: 238475 MBytes device size with M = 1000*1000: 250059 MBytes (250 GB) Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Recommended acoustic management value: 254, current value: 0 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 udma7 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE SET_MAX security extension Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test * General Purpose Logging feature set * Segmented DOWNLOAD_MICROCODE * SATA-I signaling speed (1.5Gb/s) * SATA-II signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters DMA Setup Auto-Activate optimization Device-initiated interface power management * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Long Sector Access (AC1) * SCT LBA Segment Access (AC2) * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count supported: enhanced erase 88min for SECURITY ERASE UNIT. 88min for ENHANCED SECURITY ERASE UNIT. Checksum: correct
-Christian - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |