lkml.org 
[lkml]   [2007]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: FF layer restrictions [Was: [PATCH 1/1] Input: add sensable phantom driver]
On 3/14/07, STenyaK (Bruno González) <stenyak@gmail.com> wrote:
> On 3/14/07, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
> > > I have a question: if the force is to be 3D, why only 3 possible values?
> > > What would they be, 3 torques or 3 forces? In the case of car sims (ff
> > > steering wheels), only one axis of torque is usually used (except for 6 dof
> > > platforms, as mentioned).
> > >
> >
> > I wonder if we could somehow extend or augment FF envelope se we could
> > specify a plane for the effect.. Then a vector could be represented by
> > a sum 3 constant effects in 3 separate planes and we could also use
> > spring and other effects as well.
>

I would think one plane and one axis is all that's needed for a 3d vector, or?
Do we understand eachother?

> Ideally, afaik we should use:
> -3 values for translation force (linear force): x,y,z components of
> the force vector.
> -4 values for rotation force (torque): x,y,z,w components of the
> quaternion. You can also use euler angles (and i think there are
> another one or two notations), which is just 3 values, but i'm not
> sure it will be a correct decision (due to the gimbal lock problem,
> which may or may not be present in ff devices, dunno).

Same remark here. A torque is a 3-dimensional thing, just like a
force. What for do you need 4 components?

--
Johann
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-03-15 21:53    [W:0.079 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site