lkml.org 
[lkml]   [2007]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: libata_uli puts second channel to PIO4 on 2.6.18
Grzegorz Kulewski wrote:
> It worked very well for half a year but with one disk (IIRC it was even
> plugged into second channel but I wont bet on it). Now I have second
> disk (very similar) and it is always put into PIO4 mode:
>
> [ 17.404451] libata version 2.00 loaded.
> [ 17.404916] sata_uli 0000:00:04.0: version 1.0
> [ 17.405009] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 18 (level,
> low) -> IRQ 185
> [ 17.405223] ata1: SATA max UDMA/133 cmd 0xD400 ctl 0xD002 bmdma
> 0xB000 irq 185
> [ 17.405385] ata2: SATA max UDMA/133 cmd 0xB800 ctl 0xB402 bmdma
> 0xB008 irq 185
> [ 17.405519] scsi2 : sata_uli
> [ 17.858803] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [ 17.880541] ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48
> NCQ (depth 0/32)
> [ 17.880660] ata1.00: ata1: dev 0 multi count 16
> [ 17.888858] ata1.00: configured for UDMA/133
> [ 17.888941] scsi3 : sata_uli
> [ 18.342469] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [ 18.343573] ata2.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48
> NCQ (depth 0/32)
> [ 18.343691] ata2.00: ata2: dev 0 multi count 16
> [ 18.344972] ata2.00: configured for PIO4

Some uli controllers have simplex bit stuck high indicating that they
can't perform DMA transfers simultaneously on both channels. In this
case, libata configures the second channel as PIO only. This has been
worked around by the following commit.

commit b2a8bbe67d73631c71492fd60b757fc50a87f182
Author: Tejun Heo <htejun@gmail.com>
Date: Thu Jan 25 19:40:05 2007 +0900

libata: implement ATA_FLAG_IGN_SIMPLEX and use it in sata_uli

Some uli controllers have stuck SIMPLEX bit which can't be cleared
with ata_pci_clear_simplex(), but the controller is capable of doing
DMAs on both channels simultaneously. Implement ATA_FLAG_IGN_SIMPLEX
which makes libata ignore the simplex bit and use it in sata_uli.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

For quick fix, just comment out lines which set ATA_HOST_SIMPLEX in
drivers/scsi/libata-bmdma.c. e.g.

/*if (inb(bmdma + 2) & 0x80)
probe_ent->host_set_flags |= ATA_HOST_SIMPLEX;*/

--
tejun

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-02-07 18:59    [W:2.011 / U:1.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site