lkml.org 
[lkml]   [2007]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: D-Link DGE-528T (r8159) autonegotation of 1000 Mbps link does not work
Petri T. Koistinen wrote:
> Hi!
>
> I just brought two D-Link DGE-528T (uses r8159 driver) network adapters
> to have nice 1 Gbps home network between two computers.
>
> I have gigabit crossover cable that is connected like this...
>
> Pin Connector #1 Connector #2
> 1 white/orange white/green
> 2 orange green
> 3 white/green white/orange
> 4 blue white/brown
> 5 white/blue brown
> 6 green orange
> 7 white/brown blue
> 8 brown white/blue
> (from: http://logout.sh/computers/net/gigabit/)

That's just plain screwy. Gigabit doesn't use crossover cables *AT
ALL*, although some of them *tolerate* the green and orange pairs being
crossed for compatibility with older crossover cables. However, the
cable above is just plain weird. There is absolutely no reason to cross
the blue and brown pair.

If you know both ends are gigabit, always use a straight-through cable.
If you know at least one end is gigabit (or auto MDI/MDIX), you can
almost always use a straight-through cable as well. Use crossover
cables for 10/100 equipment only.

-hpa
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-02-27 22:53    [W:0.039 / U:1.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site