lkml.org 
[lkml]   [2007]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: PCI riser cards and PCI irq routing, etc
From
Date
Udo van den Heuvel <udovdh@xs4all.nl> writes:

> FYI: My situation is a VIA Epia EN12000 with a TranquilPC dual PCI riser
> where only the Device Number can be changed.

With jumpers?

> So IRQ 16 and 20. But when using the stock 2.6.20 kernel there is no
> communication with the DVB-T card (the frontend), so there is no
> /dev/dvb/* entry. This points to an IRQ problem.
>
> How can I find out the actual IRQ that the card is using?

I would remove the PCI cards and then the riser card and check INT
routing with a multimeter.
Perhaps a task for someone used to stuff like that.

> I set the BIOS for 'PnP OS installed'. Should I change that?

Most drivers already enable devices so it probably doesn't matter.
I would check it, though.
--
Krzysztof Halasa
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-02-18 21:53    [W:0.093 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site