Messages in this thread | | | From | "Paul Rolland" <> | Subject | RE: AHCI - remove probing of ata2 | Date | Sat, 10 Feb 2007 21:01:53 +0100 |
| |
Hi Alan,
> You have the old driver 0n 0x1F0 > > > > PCI: Device 0000:02:00.0 not available because of resource > collisions > > ahci: probe of 0000:02:00.0 failed with error -22 > > ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22 > > ata: 0x1F0 IDE port busy > > And the new drivers trying to manage the same port > > > CONFIG_IDE=y > > CONFIG_BLK_DEV_IDE=y > > Set those to "N" and try again
Done that, rebuilt and rebooted... /dev/hda and /dev/hdb (old driver) are gone... OK, rebooting again, with a new root device as /dev/sde1... No problem for the old IDE devices, they are now /dev/sdX.
But the Jmicron stuff is still broken though no more conflict :(
PCI: Enabling device 0000:02:00.1 (0000 -> 0001) ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 16 (level, low) -> IRQ 16 ata7: PATA max UDMA/100 cmd 0x9C00 ctl 0x9882 bmdma 0x9400 irq 16 ata8: PATA max UDMA/100 cmd 0x9800 ctl 0x9482 bmdma 0x9408 irq 16 scsi6 : pata_jmicron ata7.00: ATAPI, max UDMA/66 ata7.00: qc timeout (cmd 0xef) ata7.00: failed to set xfermode (err_mask=0x4) ata7.00: limiting speed to UDMA/44 ata7: failed to recover some devices, retrying in 5 secs ata7.00: qc timeout (cmd 0xef) ata7.00: failed to set xfermode (err_mask=0x4) ata7.00: limiting speed to PIO0 ata7: failed to recover some devices, retrying in 5 secs ata7.00: qc timeout (cmd 0xef) ata7.00: failed to set xfermode (err_mask=0x4) ata7.00: disabled scsi7 : pata_jmicron ATA: abnormal status 0x7F on port 0x9807
Also, I've seen a :
ata1: Spurious SDB FIS during NCQ issue=0x0 SAct=0x7ff8001f FIS=004040a1:00040000
What's this ? Is it really bad or just a warning ???
Regards, Paul
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |