lkml.org 
[lkml]   [2007]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Error returns not handled correctly by sysfs.c:subsys_attr_store()
From
Date
On Thu, 2007-11-29 at 10:07 +0900, Tejun Heo wrote:
> Andrew Patterson wrote:
> > I tried with clean 2.6.24-rc3 and get the same bad behavior. This is on
> > an ia64 box, so maybe that is an issue. I can try on an x86 box as well.
> > Oh, one other thing. I tried a "uname -r" to make sure I had the
> > correct kernel booted and got:
> >
> > # uname -r
> > 2.6.24-rc3
> > x
> > y
> > z
> > #
>
> Yeah, please try it on another machine from clean tree. sysfs code is
> definitely not endian dependent and is 64 bit clean. Heck, all my test
> machines run 64 bit these days. I would be surprised if it's something
> architecture dependent but please try on a different machine with
> different userland with kernel built from fresh source tree.
>
> Thanks.

I tried this on a AMD system running an i386 kernel. I get the same bad
behavior. This is from a 2.6.24-rc3 kernel downloaded from kernel.org.
I ran "make mrproper" followed by "make oldconfig" and accepted all the
defaults for the config.

There is one slight change with this experiment. Other nodes are not
getting corrupted, i.e., uname -r is getting the correct value.

--
Andrew Patterson
Hewlett-Packard Company



\
 
 \ /
  Last update: 2007-12-03 22:19    [W:0.025 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site