lkml.org 
[lkml]   [2007]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: mm snapshot broken-out-2007-11-06-02-32.tar.gz uploaded - build failure - rpadlpar_sysfs
From
Date
On Tue, 2007-11-06 at 21:04 +0530, Kamalesh Babulal wrote:
> Hi Andrew,
>
> The build fails with following error
>
> CC drivers/pci/hotplug/rpadlpar_sysfs.o
> drivers/pci/hotplug/rpadlpar_sysfs.c:133: error: initializer element is not constant
> drivers/pci/hotplug/rpadlpar_sysfs.c:133: error: (near initialization for `dlpar_io_kset.kobj.parent')
> drivers/pci/hotplug/rpadlpar_sysfs.c:133: error: initializer element is not constant
> drivers/pci/hotplug/rpadlpar_sysfs.c:133: error: (near initialization for `dlpar_io_kset.kobj')
> drivers/pci/hotplug/rpadlpar_sysfs.c:134: error: unknown field `ktype' specified in initializer
> drivers/pci/hotplug/rpadlpar_sysfs.c:134: warning: initialization from incompatible pointer type
> make[3]: *** [drivers/pci/hotplug/rpadlpar_sysfs.o] Error 1
> make[2]: *** [drivers/pci/hotplug] Error 2
> make[1]: *** [drivers/pci] Error 2
> make: *** [drivers] Error 2
>
> The patch, gregkh-driver-kset-convert-pci-hotplug-to-use-kset_create_and_register.patch
> is causing the build failure.

Here is the fix (against 24-rc1 mm-brokenout). Can you try it ?

Thanks,
Badari

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
---
drivers/pci/hotplug/rpadlpar_sysfs.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)

Index: linux-2.6.24-rc1/drivers/pci/hotplug/rpadlpar_sysfs.c
===================================================================
--- linux-2.6.24-rc1.orig/drivers/pci/hotplug/rpadlpar_sysfs.c 2007-11-06 10:09:10.000000000 -0800
+++ linux-2.6.24-rc1/drivers/pci/hotplug/rpadlpar_sysfs.c 2007-11-06 10:11:33.000000000 -0800
@@ -129,14 +129,13 @@ struct kobj_type ktype_dlpar_io = {
};

struct kset dlpar_io_kset = {
- .kobj = {.ktype = &ktype_dlpar_io,
- .parent = &pci_hotplug_slots_kset->kobj},
- .ktype = &ktype_dlpar_io,
+ .kobj = {.ktype = &ktype_dlpar_io},
};

int dlpar_sysfs_init(void)
{
kobject_set_name(&dlpar_io_kset.kobj, DLPAR_KOBJ_NAME);
+ dlpar_io_kset.kobj.parent = &pci_hotplug_slots_kset->kobj;
if (kset_register(&dlpar_io_kset)) {
printk(KERN_ERR "rpadlpar_io: cannot register kset for %s\n",
kobject_name(&dlpar_io_kset.kobj));

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-11-06 19:21    [W:0.191 / U:1.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site