lkml.org 
[lkml]   [2007]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRE: 2.6.23.1 - sata_mv (7042) hang with large file operations
Date
From
I have gotten it to boot from those hard-drives and it 
has the same behavior:

Copying a large file to the same partition (>150MEG)
causes the system to hang (no I/O - no input/output -
nothing - complete freeze - like a primary resource
is locked up or interrupts got completely & totally
turned off in an ISR and its pending for something?

Only way to get out of this is to power-cycle the box!

@#$@#$#@





-----Original Message-----

> ::: Can you give me exact details of how to set up and reproduce this?
> ::: -- Kernel version
>
> Linux-2.6.23.1
>
> NOTE: I am using ppc (arch/ppc instead of arch/powerpc)
>
> ::: -- number/config/model of drives
>
> 2x250GIG Western Digital - 3 partitions (largest (/dev/sda3
> ~200Gig - formatted to ext2).
>
> 7042 PEX on a MPC8548 Board
>
> ::: -- exact command line sequence to cause the failure
>
> NFS mount root file system (I am currently rebuild to take away
> the NFS file system dependency) - /dev/sda3 is drive in
question...
..

MMmm.. I'd like to see that again without the rootfs-on-NFS.

What exactly do you mean when you say "it just hangs" ?
Everything (dead system)?


-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-11-14 22:27    [W:0.052 / U:2.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site