Messages in this thread | | | From | Jan-Simon Möller <> | Subject | Re: sata NCQ blacklist entry | Date | Wed, 14 Nov 2007 17:27:43 +0100 |
| |
Am Dienstag 13 November 2007 21:55:15 schrieb Jan-Simon Möller: > Hi! > > Just using kernel 2.6.24-rc2 (325d22df7b19e0116aff3391d3a03f73d0634ded). > > When booting the system hangs, using the emergency-sync a couple of times > gets the system to go on at some point. > Its always around starting X/Firewall (can't actually say whats done in > this moment).
It was smartd starting - after that i got the stuck state reported in my last mail. With smartd off i only get this:
dmesg | grep ata
ACPI: SSDT 7F6D3C3F, 02DD (r1 SataRe SataAhci 1000 INTL 20060912) PERCPU: Allocating 46968 bytes of per cpu data Memory: 2048732k/2087744k available (2219k kernel code, 38624k reserved, 992k data, 344k init) ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 libata version 3.00 loaded. ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 4347 ata2: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404180 irq 4347 ata3: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404200 irq 4347 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133 ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata_piix 0000:00:1f.1: version 2.12 scsi3 : ata_piix scsi4 : ata_piix ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WW01, max UDMA/33 ata4.00: configured for UDMA/33 EXT3-fs: mounted filesystem with ordered data mode. ata1.00: exception Emask 0x2 SAct 0xc SErr 0x0 action 0x2 frozen ata1.00: spurious completions during NCQ issue=0x0 SAct=0xc FIS=004040a1:00000002 ata1.00: cmd 61/08:10:24:e1:db/00:00:06:00:00/40 tag 2 cdb 0x0 data 4096 out ata1.00: status: { DRDY } ata1.00: cmd 61/10:18:d4:df:db/00:00:06:00:00/40 tag 3 cdb 0x0 data 8192 out ata1.00: status: { DRDY } ata1: soft resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x2 SAct 0x4 SErr 0x0 action 0x2 frozen ata1.00: spurious completions during NCQ issue=0x0 SAct=0x4 FIS=004040a1:00000002 ata1.00: cmd 61/08:10:c7:fb:18/00:00:0e:00:00/40 tag 2 cdb 0x0 data 4096 out ata1.00: status: { DRDY } ata1: soft resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x2 SAct 0x60 SErr 0x0 action 0x2 frozen ata1.00: spurious completions during NCQ issue=0x0 SAct=0x60 FIS=004040a1:00000010 ata1.00: cmd 61/08:28:07:fb:18/00:00:0e:00:00/40 tag 5 cdb 0x0 data 4096 out ata1.00: status: { DRDY } ata1.00: cmd 61/08:30:c7:fb:18/00:00:0e:00:00/40 tag 6 cdb 0x0 data 4096 out ata1.00: status: { DRDY } ata1: soft resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/133 ata1: EH complete
Best regards Jan-Simon - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |