lkml.org 
[lkml]   [2007]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.24-rc1 oops
FUJITA Tomonori wrote:
> Jens, I should have CC'ed to you.
>
> On Thu, 25 Oct 2007 10:22:02 +0900
> FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> wrote:
>
>> On Thu, 25 Oct 2007 01:40:00 +0100
>> Sid Boyce <g3vbv@blueyonder.co.uk> wrote:
>>
>>> x86_64 dual, gcc version 4.2.2 (SUSE Linux).
>>> ------------[ cut here ]------------
>>> kernel BUG at include/linux/scatterlist.h:50!
>>> invalid opcode: 0000 [1] SMP
>>> CPU 1
>>> Modules linked in: ub crc_itu_t hwmon cdrom soundcore v4l1_compat
>>> videobuf_core btcx_risc ff_memless floppy sg forcedeth ehci_hcd ohci_hcd
>>> sd_mod usbcore jfs edd ext3 mbcache jbd fan pata_jmicron ahci sata_nv
>>> pata_amd libata scsi_mod thermal processor
>>> Pid: 0, comm: swapper Not tainted 2.6.24-rc1-smp #1
>>> RIP: 0010:[<ffffffff881f3d27>] [<ffffffff881f3d27>]
>>> :ub:ub_state_sense+0x9a/0x169
>>> RSP: 0018:ffff810100697e60 EFLAGS: 00010093
>>> RAX: 0000000087654321 RBX: ffff810105d55000 RCX: ffff81011f975540
>>> RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff81011f975540
>>> RBP: ffff810105d51000 R08: 0000000000000000 R09: ffff810105d55098
>>> R10: ffff810001c319b8 R11: 0000000000000286 R12: ffff810105d55098
>>> R13: ffff810105d55260 R14: ffff810105d55278 R15: ffff810105d55298
>>> FS: 00002afb8597c6f0(0000) GS:ffff810100001800(0000) knlGS:0000000000000000
>>> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
>>> CR2: 00002afb8548200f CR3: 000000010615b000 CR4: 00000000000006e0
>>> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>>> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>>> Process swapper (pid: 0, threadinfo ffff810100690000, task ffff810100689160)
>>> Stack: 0000000000000001 ffff810105d55000 ffff810105d51000 0000000000000000
>>> ffff810105d55260 ffffffff881f4d43 ffff810105919998 ffff810105d553a0
>>> ffff810105d553af ffff810105d55348 0000000000000286 ffff810105d55058
>>> Call Trace:
>>> <IRQ> [<ffffffff881f4d43>] :ub:ub_scsi_action+0x1e3/0x214
>>> [<ffffffff8023a34e>] tasklet_action+0x54/0x97
>>> [<ffffffff8023a261>] __do_softirq+0x65/0xce
>>> [<ffffffff8020d0bc>] call_softirq+0x1c/0x28
>>> [<ffffffff8020e634>] do_softirq+0x2c/0x7d
>>> [<ffffffff8023a1b7>] irq_exit+0x3f/0x84
>>> [<ffffffff8020e7c3>] do_IRQ+0x13e/0x15f
>>> [<ffffffff8020afa0>] default_idle+0x0/0x3d
>>> [<ffffffff8020afa0>] default_idle+0x0/0x3d
>>> [<ffffffff8020c441>] ret_from_intr+0x0/0xa
>>> <EOI> [<ffffffff8020afc9>] default_idle+0x29/0x3d
>>> [<ffffffff8020b070>] cpu_idle+0x93/0xbb
>> Can you try this?
>>
>> Thanks,
>>
>> diff --git a/drivers/block/ub.c b/drivers/block/ub.c
>> index 14143f2..78f158f 100644
>> --- a/drivers/block/ub.c
>> +++ b/drivers/block/ub.c
>> @@ -1428,6 +1428,7 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
>> scmd->state = UB_CMDST_INIT;
>> scmd->nsg = 1;
>> sg = &scmd->sgv[0];
>> + sg_init_table(sg, UB_MAX_REQ_SG);
>> sg_set_page(sg, virt_to_page(sc->top_sense));
>> sg->offset = (unsigned long)sc->top_sense & (PAGE_SIZE-1);
>> sg->length = UB_SENSE_SIZE;
>> @@ -1864,6 +1865,7 @@ static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
>> cmd->state = UB_CMDST_INIT;
>> cmd->nsg = 1;
>> sg = &cmd->sgv[0];
>> + sg_init_table(sg, UB_MAX_REQ_SG);
>> sg_set_page(sg, virt_to_page(p));
>> sg->offset = (unsigned long)p & (PAGE_SIZE-1);
>> sg->length = 8;
>
> Here's a modified version for your sg branch (for sg_set_page API
> changes).
>
> -
> From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
> Subject: [PATCH] ub: add sg_init_table for sense and read capacity commands
>
> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
> ---
> drivers/block/ub.c | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/block/ub.c b/drivers/block/ub.c
> index 5e740e1..08e909d 100644
> --- a/drivers/block/ub.c
> +++ b/drivers/block/ub.c
> @@ -1428,6 +1428,7 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
> scmd->state = UB_CMDST_INIT;
> scmd->nsg = 1;
> sg = &scmd->sgv[0];
> + sg_init_table(sg, UB_MAX_REQ_SG);
> sg_set_page(sg, virt_to_page(sc->top_sense), UB_SENSE_SIZE,
> (unsigned long)sc->top_sense & (PAGE_SIZE-1));
> scmd->len = UB_SENSE_SIZE;
> @@ -1863,6 +1864,7 @@ static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
> cmd->state = UB_CMDST_INIT;
> cmd->nsg = 1;
> sg = &cmd->sgv[0];
> + sg_init_table(sg, UB_MAX_REQ_SG);
> sg_set_page(sg, virt_to_page(p), 8, (unsigned long)p & (PAGE_SIZE-1));
> cmd->len = 8;
> cmd->lun = lun;

Boots OK, but oopses with depmod on Virtualbox and other proprietary
modules. I assume these modules are out of step with 2.6.24-rc1 and not
a kernel problem.
Regards
Sid.
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-10-25 17:17    [W:0.044 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site