lkml.org 
[lkml]   [2007]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Syba 8-Port Serial Card Unidentified By Kernel
Andrey Panin wrote:
>
> Is it possible to connect two ports and run getty on one port and minicom on
> another ? We should check that UARTs are really working.
>
>
I used the on-board serial port as a known working control (after
getting it to work with the other onboard serial port) to try and
connect over to one of the Syba card ports (using Cutecom & getty). The
lines light up, but there's nothing getting sent from the 8-port as far
as I can see. The onboard port works as I'd expect, the Syba (running
getty identically from inittab) doesn't.

-- Chris


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-10-18 00:19    [W:0.063 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site