Messages in this thread | | | Date | Sun, 14 Jan 2007 16:22:35 -0800 | From | Andrew Morton <> | Subject | Re: i810fb fails to load (was: 2.6.20-rc4-mm1) |
| |
> On Mon, 15 Jan 2007 00:52:36 +0100 Tilman Schmidt <tilman@imap.cc> wrote: > With kernel 2.6.20-rc4-mm1 and all hotfixes, i810fb fails to load on my > Dell Optiplex GX110. Here's an excerpt of the diff between the boot logs > of 2.6.20-rc5 (working) and 2.6.20-rc4-mm1 (non-working): > > @@ -4,7 +4,7 @@ > No module symbols loaded - kernel modules not enabled. > > klogd 1.4.1, log source = ksyslog started. > -<5>Linux version 2.6.20-rc5-noinitrd (ts@gx110) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #2 PREEMPT Sun Jan 14 23:37:12 CET 2007 > +<5>Linux version 2.6.20-rc4-mm1-noinitrd (ts@gx110) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #3 PREEMPT Sun Jan 14 21:08:56 CET 2007 > <6>BIOS-provided physical RAM map: > <4>sanitize start > <4>sanitize end > @@ -188,7 +192,6 @@ > <6>ACPI: Interpreter enabled > <6>ACPI: Using PIC for interrupt routing > <6>ACPI: PCI Root Bridge [PCI0] (0000:00) > -<7>PCI: Probing PCI hardware (bus 00) > <6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 > <7>Boot video device is 0000:00:01.0 > <4>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO > @@ -238,20 +241,15 @@ > <6>isapnp: No Plug & Play device found > <6>Real Time Clock Driver v1.12ac > <6>Intel 82802 RNG detected > -<6>Linux agpgart interface v0.101 (c) Dave Jones > +<6>Linux agpgart interface v0.102 (c) Dave Jones > <6>agpgart: Detected an Intel i810 E Chipset. > <6>agpgart: detected 4MB dedicated video ram. > <6>agpgart: AGP aperture is 64M @ 0xf8000000 > <4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 > <7>PCI: setting IRQ 9 as level-triggered > <6>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 > -<4>i810-i2c: Probe DDC1 Bus > -<4>i810fb_init_pci: DDC probe successful > -<4>Console: switching to colour frame buffer device 160x64 > -<4>I810FB: fb0 : Intel(R) 810E Framebuffer Device v0.9.0 > -<4>I810FB: Video RAM : 4096K > -<4>I810FB: Monitor : H: 30-83 KHz V: 55-75 Hz > -<4>I810FB: Mode : 1280x1024-8bpp@60Hz > +<4>i810fb_alloc_fbmem: can't bind framebuffer memory > +<4>i810fb: probe of 0000:00:01.0 failed with error -16 > <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > <6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > > Please let me know if you need more information. >
Don't know. But I bet someone on the Cc does... - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |