lkml.org 
[lkml]   [2007]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjecte1000 : link down issues
Hi,

I got a 82566DM e1000 network controller [1] on my motherboard, and most of the
time the link go down when doing dhcp. [2]

ifconfig eth0 up -> link become up
dhclient eth0 -> some packet are transmited and received and the link become
down.



I sometimes got e1000_reset: Hardware Error.

This happen with vanilla 2.6.19 and e1000-7.3.20 drivers.

This is very anoying because I should do rmmod e1000; modprobe e1000; ifup e1000
in loop until the link stay up.
I try forcing speed, duplex and flow control, but nothing solve my issue.

The device is working fine on windows.

What should I do ?

Thanks.


Matthieu CASTET


[1]
00:19.0 0200: 8086:104a (rev 02)
Subsystem: 103c:2800

[2]
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
None
e1000: eth0: e1000_watchdog: NIC Link is Down
e1000: 0000:00:19.0: e1000_validate_option: Flow Control Disabled
e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1)
00:0f:fe:77:08:a1
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
None
e1000: eth0: e1000_watchdog: NIC Link is Down
e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1)
00:0f:fe:77:08:a1
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX
e1000: eth0: e1000_watchdog: NIC Link is Down
e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1)
00:0f:fe:77:08:a1
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX
e1000: eth0: e1000_watchdog: NIC Link is Down
e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1)
00:0f:fe:77:08:a1
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
None
e1000: eth0: e1000_watchdog: NIC Link is Down
e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
None
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-01-11 18:59    [W:0.044 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site