lkml.org 
[lkml]   [2006]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Linux 2.6.18-rc6
On Fri, Sep 15, Doug Ledford wrote:

> Sorry for my belated response, but this usually happens when you access
> an aic chipset too soon after a chip reset. Try putting a delay before
> whatever access is causing this to see if it make s difference. Common
> problems include after a chip reset, touching any register will cause
> the card to reset, etc.

I put a ssleep(1) before the ahc_inb(ahc, SBLKCTL);
Does not help. Is it possible that the card loses some of its features
during reset and something needs to be done to reenable them?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-09-16 10:47    [W:0.088 / U:26.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site