lkml.org 
[lkml]   [2006]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.18-rc7-git1: AHCI not seeing devices on ICH8 mobo (DG965RY)
Robin H. Johnson wrote:
> [Please CC me, I'm not subscribed.]
>
> Recently picked up some new hardware (without sufficiently researching
> it), and I have found that the AHCI driver does NOT see my SATA optical
> device at all.

> scsi1 : ahci
> ata1: SATA link down (SStatus 0 SControl 300)
> scsi2 : ahci
> ata2: SATA link down (SStatus 0 SControl 300)
> scsi3 : ahci
> ata3: SATA link down (SStatus 0 SControl 0)
> scsi4 : ahci
> ata4: SATA link down (SStatus 0 SControl 0)


Unfortunately the SATA phy isn't showing that a SATA device (hd or cdrom
or anything) is connected. So can't do anything much at all, if that is
the case.

Perhaps re-check all the power connections, cables, etc.

Jeff


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-09-14 21:21    [W:1.008 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site