lkml.org 
[lkml]   [2006]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [linux-usb-devel] 2.6.18-rc6-mm1 (-mm2): ohci resume problem
On Wed, 13 Sep 2006, Rafael J. Wysocki wrote:

> > Try this patch instead. It looks for problems occurring a little earlier
> > in the call chain.
>
> I've applied both patches at a time (I hope they don't conflict).
>
> The dmesg output is attached.

The dmesg output shows the root-hub device state is set wrong.

I have to leave now, so I can't give you another patch to try. You can
experiment as follows...

Look in drivers/usb/host/ehci-pci.c, at ehci_pci_resume(). The part of
interest is everything following the "restart:" statement label.

Try adding some ehci_dbg() lines in there (copy the form of the line just
after restart:). We want to follow the value of
hcd->self.root_hub->state. Initially it should be equal to
USB_STATE_SUSPENDED (= 8), and it shouldn't change. But somewhere it is
getting set to USB_STATE_CONFIGURED (= 7). I don't know where, but almost
certainly somewhere in this routine. If you can find out where that
happens, I'd appreciate it.

Alan Stern

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-09-13 23:57    [W:0.103 / U:0.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site