lkml.org 
[lkml]   [2006]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: ALSA problems with 2.6.18-rc3
At Tue, 08 Aug 2006 21:28:21 +0100,
Andrew Benton wrote:
>
> Hello World,
> I use the optical digital output from my computer and normally it works
> well. However, with a 2.6.18-rc* kernel I have to use alsamixer to get
> any output from it. I tweak the levels till it's working and use alsactl
> store to save it. Normally, when I reboot it's enough to have a
> bootscript run alsactl restore and it should work, but as I said, with
> a 2.6.18-rc* kernel it doesn't. Every time I have to use alsamixer to
> change the <IEC958 P> setting to A/D Conv and then back to AC-Link again
> to get the diode to come on and start sending a signal to the amplifier.
> And the problems don't stop there. At first it sounds fine but after a
> few minutes it starts to develop a harsh, tinny, metallic, distorted
> quality and it becomes unlistenable.
>
> According to alsamixer v1.0.11, the card is an Intel ICH5 and the chip
> is an Analog Devices AD1981B

There is no influential change in intel8x0 and ac97 stuff between
2.6.17 and 2.6.18. If it worked with 2.6.17, it must be something
else.


Takashi
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-08-09 13:01    [W:0.152 / U:0.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site