Messages in this thread | | | Subject | Re: R: How to avoid serial port buffer overruns? | From | Lee Revell <> | Date | Fri, 18 Aug 2006 13:30:40 -0400 |
| |
On Fri, 2006-08-18 at 18:04 +0100, Russell King wrote: > On Fri, Aug 18, 2006 at 01:00:00PM -0400, Lee Revell wrote: > > On Fri, 2006-08-18 at 10:48 +0200, Giampaolo Tomassoni wrote: > > > > On Thu, 2006-08-17 at 00:19 +0100, Russell King wrote: > > > > > > > > > > > > OK, thanks. FWIW here is the serial board we are using: > > > > > > > > http://www.moschip.com/html/MCS9845.html > > > > > > > > The hardware guy says "The mn9845cv, have in default 2 serial ports and > > > > one ISA bus, where we have connected the tl16c554, quad serial port." > > > > > > > > Hopefully Ingo's latency tracer can tell me what is holding off > > > > interrupts. > > > > > > I beg your pardon: I'm not used that much to interrupts handling in Linux, but this piece of code from sound/drivers/serial-u16550.c in a linux-2.6.16: > > > > OK, they are not using serial-u16550 but 8250_fourport for some reason: > > Doesn't look like it. fourport cards have their ports at 0x1a0..0x1bf > and 0x2a0..0x2bf, and have some special and non-standard features. >
Which driver is being used then?
# cat /proc/interrupts CPU0 0: 801050 IO-APIC-edge timer 1: 42 IO-APIC-edge i8042 7: 0 IO-APIC-edge parport0 8: 4 IO-APIC-edge rtc 9: 0 IO-APIC-level acpi 12: 11022 IO-APIC-edge i8042 14: 2517 IO-APIC-edge ide0 169: 536096 IO-APIC-level ohci1394, ICE1712 185: 3908 IO-APIC-level eth0, serial 193: 8610 IO-APIC-level libata 201: 326 IO-APIC-level uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, ehci_hcd:usb5 217: 84947 IO-APIC-level nvidia NMI: 0 LOC: 800973 ERR: 0 MIS: 0
# lsmod | egrep serial\|8250 8250_fourport 2048 0 [permanent] 8250_pnp 8704 0 parport_serial 7680 0 parport_pc 31984 1 parport_serial 8250_pci 19968 1 parport_serial 8250 22704 12 8250_pnp,8250_pci serial_core 19200 1 8250
Serial: 8250/16550 driver $Revision: 1.90 $ 10 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected AGP bridge 0 agpgart: AGP aperture is 128M @ 0xe8000000 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] Real Time Clock Driver v1.12ac input: PC Speaker as /class/input/input1 ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 185 0000:00:0b.0: ttyS4 at I/O 0xdd00 (irq = 185) is a 16550A 0000:00:0b.0: ttyS5 at I/O 0xe300 (irq = 185) is a 16550A 0000:00:0b.0: ttyS6 at I/O 0xe400 (irq = 185) is a 16550A 0000:00:0b.0: ttyS7 at I/O 0xd000 (irq = 185) is a 16550A 0000:00:0b.0: ttyS8 at I/O 0xd100 (irq = 185) is a 16550A 0000:00:0b.0: ttyS9 at I/O 0xd200 (irq = 185) is a 16550A
Lee
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |