lkml.org 
[lkml]   [2006]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [2.6.18-rc2-mm1] libata: DMA speed too slow for cdrecord
From
Date
Ar Sad, 2006-07-29 am 23:54 +0200, ysgrifennodd J.A. Magallón:
> ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14

Chip configuration reports OK
> scsi0 : ata_piix
> ata1.00: ATAPI, max UDMA/33
> ata1.01: ATAPI, max MWDMA0, CDB intr
> ata1.00: configured for PIO3
> ata1.01: configured for PIO3

Your tree appears to have the old speed setting code in it not the new
speed setting code. As a result of this it tries to set both to MWDMA0
which isn't available on the ICH chips and so falls back to PIO3.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-07-31 12:53    [W:1.457 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site