Messages in this thread | | | Date | Sat, 27 May 2006 02:59:03 -0400 | From | George Nychis <> | Subject | Re: ds.o: init_module: Operation not permitted (no socket drivers loaded) |
| |
George Nychis wrote: > Hey guys, > > I have a prism card that I would like to get working with my 2.4.32 > kernel. I installed pcmcia-cs and removed pcmcia support from the > kernel, i am not sure if this was the right decision, if not please tell me. > > So after installing pcmcia_cs, i boot and modprobe pcmcia_core and > hostap, then i try to modprobe hostap_cs and i get: > > [root@emu-5 hostap-driver-0.4.9]# modprobe hostap_cs > /lib/modules/2.4.32/pcmcia/ds.o: init_module: Operation not permitted > Hint: insmod errors can be caused by incorrect module parameters, > including invalid IO or IRQ parameters. > You may find more information in syslog or the output from dmesg > > So of course I dmesg: > ds: no socket drivers loaded! > > I can successfully get the card to work in my 2.6.9 kernel, here is my > lsmod... the only thing i see different is the yenta_socket which I am > not sure of: > [root@emu-5 ~]# lsmod > Module Size Used by > parport_pc 24705 1 > lp 11565 0 > parport 41737 2 parport_pc,lp > autofs4 24005 0 > i2c_dev 10433 0 > i2c_core 22081 1 i2c_dev > sunrpc 160421 1 > hostap_cs 62656 3 > hostap 117132 1 hostap_cs > ds 16965 3 hostap_cs > button 6481 0 > battery 8517 0 > ac 4805 0 > md5 4033 1 > ipv6 232577 10 > yenta_socket 18753 1 > pcmcia_core 59913 3 hostap_cs,ds,yenta_socket > uhci_hcd 31449 0 > ehci_hcd 31557 0 > snd_intel8x0 34829 0 > snd_ac97_codec 64401 1 snd_intel8x0 > snd_pcm_oss 47609 0 > snd_mixer_oss 17217 1 snd_pcm_oss > snd_pcm 97993 2 snd_intel8x0,snd_pcm_oss > snd_timer 29765 1 snd_pcm > snd_page_alloc 9673 2 snd_intel8x0,snd_pcm > gameport 4801 1 snd_intel8x0 > snd_mpu401_uart 8769 1 snd_intel8x0 > snd_rawmidi 26725 1 snd_mpu401_uart > snd_seq_device 8137 1 snd_rawmidi > snd 54053 9 > snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device > soundcore 9889 1 snd > tg3 85445 0 > dm_snapshot 17029 0 > dm_zero 2369 0 > dm_mirror 23341 2 > ext3 116809 2 > jbd 74969 1 ext3 > dm_mod 54741 6 dm_snapshot,dm_zero,dm_mirror > ata_piix 8389 2 > libata 40005 1 ata_piix > sd_mod 16961 3 > scsi_mod 118417 2 libata,sd_mod > > > I'd greatly appreciate any help! > > Thanks! > George >
Alright i'm going to respond to my own post real quick... I built pcmcia support into the kernel instead of using pcmcia-cs. I now get the power light on the card light up. So then I modprobe hostap and hostap_cs
I see this in dmesg: hostap_crypt: registered algorithm 'NULL' hostap_cs: 0.4.9 - 2006-05-06 (Jouni Malinen <jkmaline@cc.hut.fi>)
It also seems to be recognizing a card: [root@emu-5 pcmcia]# cardctl info PRODID_1="INTERSIL" PRODID_2="HFA384x/IEEE" PRODID_3="Version 01.02" PRODID_4="" MANFID=0156,0002 FUNCID=6
However i see no wireless interfaces: [root@emu-5 pcmcia]# iwconfig lo no wireless extensions.
eth0 no wireless extensions.
[root@emu-5 pcmcia]# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:11:43:43:D0:11 inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:705 errors:0 dropped:0 overruns:0 frame:0 TX packets:454 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:65062 (63.5 KiB) TX bytes:81096 (79.1 KiB) Interrupt:11
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:560 (560.0 b) TX bytes:560 (560.0 b)
Any ideas?
Thanks! George - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |