Messages in this thread | | | From | Grant Coady <> | Subject | Re: [2.6.16.11] Xircom RealPort RBEM56G-100 link change issue | Date | Thu, 27 Apr 2006 09:05:23 +1000 |
| |
On Wed, 26 Apr 2006 23:46:27 +0200 (CEST), Karel Gardas <kgardas@objectsecurity.com> wrote:
> >Hello, > >I'm trying to get working linux with Xircom RealPort CardBus Ethernet >10/100+Modem 56 PCMCIA card. I only need ethernet working. The problem >with this is that I'm losing too many packets while syslog is filled with >messages like: > >Apr 26 23:17:31 thinkpad kernel: pccard: CardBus card inserted into slot 1 >Apr 26 23:18:13 thinkpad kernel: PCI: Enabling device 0000:06:00.0 (0000 -> 0003) >Apr 26 23:18:13 thinkpad kernel: PCI: Setting latency timer of device 0000:06:00.0 to 64 >Apr 26 23:18:13 thinkpad kernel: eth1: Xircom cardbus revision 3 at irq 11 >Apr 26 23:19:31 thinkpad kernel: xircom cardbus adaptor found, registering as eth1, using irq 11 >Apr 26 23:19:52 thinkpad kernel: xircom_cb: Link status has changed >Apr 26 23:19:52 thinkpad kernel: xircom_cb: Link is 100 mbit
I use same driver with Xircom RBE-100, no problems, .config + dmesg on http://bugsplatter.mine.nu/test/boxen/tosh/
The xircom_cb driver on 2.6.16.11 is okay here.
Grant. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |