lkml.org 
[lkml]   [2006]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: libATA PATA status report, new patch
> Very strange trace indeed. I'll take a look at this. At least since it
> came from Qemu I should be able to "build" a suitable PC to match yours.
>
> Original Intel PIIX devices are handled by "OLDPIIX" (0x8086, 0x1230).
> The later ones by ata_piix. The only oddity I see is that you have no
> PCI bus mastering address base assigned (bmdma)

I also tried VMWare 5.5 that emulated PIIX4. It works if I only put
ata_piix driver in. With the same kernel that Qemu gets the error,
VMWare gets another oops during generic ide initialisation. I relooked
and found that I have both generic PCI ide and generic ISA ide drivers
compiled in, so I disabled them and it works using ata_piix (with PATA
and ATAPI enabled). Even ATAPI cdrom worked as the root partition.

But, the different oops that I got in vmware with generic ide:
http://www.cs.ut.ee/~mroos/atacrash.png

--
Meelis Roos (mroos@linux.ee)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-02-07 12:12    [W:0.050 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site