lkml.org 
[lkml]   [2006]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: libata PATA status report on 2.6.16-rc1-mm5
Date

On 8 Feb 2006, at 17:26, Alan Cox wrote:

> On Mer, 2006-02-08 at 15:44 +0000, Chris Boot wrote:
>> My next step will be to play with the CD drive. Any hints on
>> stress-testing the drive? Obviously writing a CD then comparing to
>> the
>> ISO will be one step, but any others?
>
> The PATA specific code is almost entirely in the setup stages. Once
> the
> setup is done then (with the exception of early PIIX devices, radisys,
> triflex and a couple of other oddities) there is no "new" code
> actually
> being run.
>
> Alan
>

Well, I've just tried 2.6.16-rc2-ide2 on another VIA-based machine
and it seems to work just fine, allowing me to say CONFIG_IDE=n :-)
The CD drives work just fine including writing CDs, so I'm going to
try writing a DVD soon, which should stress it a little more.
However, I keep getting the following messages in dmesg:

[4294985.285000] Assertion failed! qc->n_elem > 0,drivers/scsi/libata-
core.c,ata_fill_sg,line=2635
[4294985.377000] Assertion failed! qc->n_elem > 0,drivers/scsi/libata-
core.c,ata_fill_sg,line=2635

This seems mostly harmless as everything seems to just work, but
curious nonetheless.

HTH,
Chris

--
Chris Boot
bootc@bootc.net
http://www.bootc.net/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-02-12 13:55    [W:0.030 / U:0.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site