lkml.org 
[lkml]   [2006]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: BUG on 2.6.20-rc1 when using gdb
    On Sun, 17 Dec 2006 20:55:18 -0500
    "Andrew J. Barr" <andrew.james.barr@gmail.com> wrote:

    > When I was using gdb to debug xchat-gnome, I got a kernel BUG and stack
    > trace as the program was running (e.g. I had typed 'run' in gdb):
    >
    > WARNING at kernel/softirq.c:137 local_bh_enable()
    > [<c0103cd6>] dump_trace+0x68/0x1d9
    > [<c0103e5f>] show_trace_log_lvl+0x18/0x2c
    > [<c01044d3>] show_trace+0xf/0x11
    > [<c010455e>] dump_stack+0x12/0x14
    > [<c011cc7d>] local_bh_enable+0x44/0x94
    > [<c02871b9>] unix_release_sock+0x6e/0x1fe
    > [<c02887eb>] unix_stream_connect+0x3b4/0x3cf
    > [<c0232dee>] sys_connect+0x82/0xad
    > [<c0233641>] sys_socketcall+0xac/0x261
    > [<c0102d38>] syscall_call+0x7/0xb
    > [<b7f70822>] 0xb7f70822
    > =======================
    > ------------[ cut here ]------------
    > kernel BUG at fs/buffer.c:1235!
    > invalid opcode: 0000 [#1]
    > PREEMPT
    > Modules linked in: binfmt_misc rfcomm l2cap i915 drm bluetooth nfs nfsd
    > exportfs lockd nfs_acl sunrpc nvram uinput ipv6 ppdev lp button ac
    > battery dm_crypt dm_snapshot dm_mirror dm_mod fuse cpufreq_conservative
    > cpufreq_ondemand cpufreq_performance cpufreq_powersave
    > speedstep_centrino freq_table ibm_acpi loop snd_intel8x0m snd_pcm_oss
    > snd_mixer_oss snd_intel8x0 snd_ac97_codec pcmcia ac97_bus irtty_sir
    > sir_dev ipw2200 snd_pcm snd_timer irda ieee80211 ieee80211_crypt
    > crc_ccitt rtc parport_pc parport 8250_pnp snd soundcore 8250_pci 8250
    > serial_core firmware_class i2c_i801 yenta_socket rsrc_nonstatic
    > pcmcia_core snd_page_alloc i2c_core intel_agp agpgart evdev tsdev joydev
    > ext3 jbd mbcache ide_cd cdrom ide_disk ide_generic e100 mii generic piix
    > ide_core ehci_hcd uhci_hcd usbcore
    > CPU: 0
    > EIP: 0060:[<c0179266>] Not tainted VLI
    > EFLAGS: 00010046 (2.6.20-rc1 #1)
    > EIP is at __find_get_block+0x1c/0x16f
    > eax: 00000086 ebx: 00000000 ecx: 00000000 edx: 0088a800
    > esi: 0088a800 edi: 00000000 ebp: dfffd040 esp: cad2dd30
    > ds: 007b es: 007b ss: 0068
    > Process xchat-gnome (pid: 4322, ti=cad2c000 task=d0cd3ab0
    > task.ti=cad2c000)
    > Stack: cad2dd58 c02caa0b 00000002 0000000e 0000000b 00000001 e8836580
    > 0088a800
    > 00000000 00000000 e8836610 00000000 c01793dc 00001000 c03ab3e0
    > f3cadd80
    > 00000086 c90d41b0 0088a800 00000000 dfffd040 00008000 00000000
    > 00000002
    > Call Trace:
    > [<c01793dc>] __getblk+0x23/0x268
    > [<f040d4c6>] ext3_getblk+0x10b/0x244 [ext3]
    > [<f040e364>] ext3_bread+0x19/0x70 [ext3]
    > [<f04106f3>] dx_probe+0x43/0x2c9 [ext3]
    > [<f04119b3>] ext3_htree_fill_tree+0x99/0x1ba [ext3]
    > [<f040ab77>] ext3_readdir+0x1d4/0x5ed [ext3]
    > [<c0167b29>] vfs_readdir+0x63/0x8d
    > [<c0167bb6>] sys_getdents64+0x63/0xa5
    > [<c0102d38>] syscall_call+0x7/0xb
    > [<b7f70822>] 0xb7f70822
    > =======================
    > Code: 8b 40 08 a8 08 74 05 e8 02 2f 11 00 5b 5e c3 55 89 c5 57 89 cf 56
    > 89 d6 53 83 ec 20 9c 58 90 8d b4 26 00 00 00 00 f6 c4 02 75 04 <0f> 0b
    > eb fe 89 e0 25 00 e0 ff ff ff 40 14 31 c9 8b 1c 8d a0 74
    > EIP: [<c0179266>] __find_get_block+0x1c/0x16f SS:ESP 0068:cad2dd30
    >
    > This happens on 2.6.20-rc1 but not 2.6.19.
    >

    And it's repeatable, yes?

    And you're sure that use of gdb triggers it?

    Something is forgetting to reenable local interrupts.
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2006-12-20 01:45    [W:2.401 / U:0.060 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site