Messages in this thread | | | Date | Tue, 24 Oct 2006 22:10:17 +0900 (JST) | From | Komuro <> | Subject | Re: Re: [2.6.19-rc1 APIC BUG?] kernel 2.6.19-rc1 or later can not generate ISA irq properly on DUAL-CPU system. |
| |
>> kernel 2.6.19-rc1 or later can not generate ISA irq properly on DUAL-CPU sy stem. >> kernel 2.6.18 work properly. >> >> I think this problem is caused by IRQ-subsystem change on 2.6.19-rc1. > >I have to wait until tomorrow until I get access to a system with ISA >network card. > >> Please advise. > >Does the box boot into login ? If yes, can you please provide the output >of /proc/interrupts ? >
Here is the output of /proc/interrupts
I found some interrupt-count in IRQ 3. but if I do the ping command, the IRQ 3 interrupt-count is not incremented.
I tried several 16bit-pcmcia network card. (1)Asix 100Mbps PCMCIA Network card => does not work (2)DL10019 100Mpbs PCMCIA Network card => does not work
(3)NE2000-based 10Mbps PCMCIA Network card => works properly.
CPU0 CPU1 0: 9051 10701 IO-APIC-edge timer 1: 122 135 IO-APIC-edge i8042 2: 0 0 XT-PIC-level cascade 3: 8 6 IO-APIC-edge axnet_cs <= 6: 3 2 IO-APIC-edge floppy 8: 1 0 IO-APIC-edge rtc 12: 91 14 IO-APIC-edge i8042 14: 902 1173 IO-APIC-edge ide0 15: 1 1 IO-APIC-edge i82365 NMI: 0 0 LOC: 19682 19681 ERR: 0 MIS: 0
Best Regards Komuro
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |