Messages in this thread | | | Date | Fri, 20 Oct 2006 10:37:41 +0200 | From | Martin Lorenz <> | Subject | Re: un/shared IRQ problem (was: Re: 2.6.18 - another DWARF2) |
| |
On Thu, Oct 19, 2006 at 10:14:11AM -0700, Andrew Morton wrote: > On Thu, 19 Oct 2006 08:48:10 -0600 > ebiederm@xmission.com (Eric W. Biederman) wrote: > > > > > > > There are already three interrupt sources on 201, so they are all happy to > > > share. > > > > > > It's e1000. Jesse, you fibbed ;) > > > > > > static int e1000_request_irq(struct e1000_adapter *adapter) > > > { > > > ... > > > if (adapter->have_msi) > > > flags &= ~IRQF_SHARED; > > > > Well MSI irqs can't be shared, as they are edged triggered. > > Is the e1000 really trying to use irq 201? That would indicate > > a logic failure in the msi irq allocator. It should never allocate > > an inuse irq. > > It's gone very bad. See > http://www.lorenz.eu.org/~mlo/kernel/dmesg_2.6.18-ie-la-tp-41.5+0813.boot > http://www.lorenz.eu.org/~mlo/kernel/dmesg_2.6.18-ie-la-tp-41.5+0813.out > > > I have to ask what is the state in 2.6.19-rc2? I'm wondering if > > my turning of the msi irq allocator inside out has fixed this problem. > > Martin, please try CONFIG_PCI_MSI=n. I'd expect that to fix it (it always does) > > > Does this situation work if MSI is disabled, in 2.6.18? > > > > The backwards msi irq allocator in 2.6.18 is so convoluted it may have > > a corner case where it fails, and that is triggering this mess. > > > > If 2.6.19 works with MSI's enabled and 2.6.18 works with MSI disabled > > I'm inclined to say I have done all that is reasonable. > > oh, we haven't tried 2.6.19-rc2 yet? Please do that, with CONFIG_PCI_MSI=y.
ok... I compliled and installed the latest git yesterday evening and another one this morning because of a configuration mistake I made
there are new DWARFs but the one I reported for 2.6.18 seem to be fixed at least I diden't succeed in triggering it
the new ones are in http://www.lorenz.eu.org/~mlo/kernel/dmesg_2.6.19-rc2-tp-ie-e1-42.5+0737-gce9e3d99-dirty.run http://www.lorenz.eu.org/~mlo/kernel/dmesg_2.6.19-rc2-tp-ie-e1-42.5+0737-gce9e3d99-dirty.boot
http://www.lorenz.eu.org/~mlo/kernel/interrupts_2.6.19-rc2-tp-ie-e1-42.5+0737-gce9e3d99-dirty is there too
http://www.lorenz.eu.org/~mlo/kernel/?C=M;O=D for a list of files I uploaded
[ 64.655000] kobject_add failed for vcs6 with -EEXIST, don't try to register things with the same name in the same directory. [ 64.655000] [<c0103bfd>] dump_trace+0x69/0x1af [ 64.655000] [<c0103d5b>] show_trace_log_lvl+0x18/0x2c [ 64.656000] [<c01043fa>] show_trace+0xf/0x11 [ 64.656000] [<c01044fd>] dump_stack+0x15/0x17 [ 64.656000] [<c01fbf3d>] kobject_add+0x160/0x189 [ 64.657000] [<c0250fec>] class_device_add+0xa2/0x3d8 [ 64.658000] [<c02513ae>] class_device_create+0x7c/0x9c [ 64.659000] [<c0237858>] vcs_make_sysfs+0x3c/0x7e [ 64.659000] [<c023c641>] con_open+0x6f/0x7c [ 64.660000] [<c023259b>] tty_open+0x179/0x2f0 [ 64.661000] [<c016226e>] chrdev_open+0x124/0x13f [ 64.662000] [<c015e665>] __dentry_open+0xc7/0x1ab [ 64.662000] [<c015e7c3>] nameidata_to_filp+0x24/0x33 [ 64.662000] [<c015e804>] do_filp_open+0x32/0x39 [ 64.663000] [<c015e84d>] do_sys_open+0x42/0xc3 [ 64.663000] [<c015e907>] sys_open+0x1c/0x1e [ 64.664000] [<c0102de7>] syscall_call+0x7/0xb [ 64.664000] DWARF2 unwinder stuck at syscall_call+0x7/0xb [ 64.664000] [ 64.664000] Leftover inexact backtrace: [ 64.664000] [ 64.664000] ======================= [ 64.666000] kobject_add failed for vcsa6 with -EEXIST, don't try to register things with the same name in the same directory. [ 64.666000] [<c0103bfd>] dump_trace+0x69/0x1af [ 64.666000] [<c0103d5b>] show_trace_log_lvl+0x18/0x2c [ 64.666000] [<c01043fa>] show_trace+0xf/0x11 [ 64.666000] [<c01044fd>] dump_stack+0x15/0x17 [ 64.667000] [<c01fbf3d>] kobject_add+0x160/0x189 [ 64.667000] [<c0250fec>] class_device_add+0xa2/0x3d8 [ 64.668000] [<c02513ae>] class_device_create+0x7c/0x9c [ 64.668000] [<c0237895>] vcs_make_sysfs+0x79/0x7e [ 64.669000] [<c023c641>] con_open+0x6f/0x7c [ 64.670000] [<c023259b>] tty_open+0x179/0x2f0 [ 64.670000] [<c016226e>] chrdev_open+0x124/0x13f [ 64.670000] [<c015e665>] __dentry_open+0xc7/0x1ab [ 64.671000] [<c015e7c3>] nameidata_to_filp+0x24/0x33 [ 64.671000] [<c015e804>] do_filp_open+0x32/0x39 [ 64.671000] [<c015e84d>] do_sys_open+0x42/0xc3 [ 64.672000] [<c015e907>] sys_open+0x1c/0x1e [ 64.673000] [<c0102de7>] syscall_call+0x7/0xb [ 64.673000] DWARF2 unwinder stuck at syscall_call+0x7/0xb [ 64.673000] [ 64.673000] Leftover inexact backtrace: [ 64.673000] [ 64.673000] =======================
gruss mlo -- Dipl.-Ing. Martin Lorenz
They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. Benjamin Franklin
please encrypt your mail to me GnuPG key-ID: F1AAD37D get it here: http://blackhole.pca.dfn.de:11371/pks/lookup?op=get&search=0xF1AAD37D
ICQ UIN: 33588107 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |