Messages in this thread | | | Date | Mon, 30 Jan 2006 15:46:17 +0000 | From | Martin Michlmayr <> | Subject | Re: ALSA on MIPS platform |
| |
* Takashi Iwai <tiwai@suse.de> [2006-01-30 11:18]: > Well, as Hugu pointed out, that page reservation plays no longer any > role. The patch below should work too on 2.6.15 or later.
It doesn't solve the problem I have, those "wait source ready timeout 0x1410 [0x8c8c8c8c]" messages on a Cobalt Qube2 with a 64-bit MIPS kernel.
Detecting hardware: de4x5 via82cxxx es1371 usb_uhci de4x5 disabled in configuration. Skipping unavailable/built-in via82cxxx module. Skipping unavailable/built-in es1371 module. Loading uhci_hcd module. usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.3 uhci_hcd 0000:00:09.2: Found HC with no IRQ. Check BIOS/PCI 0000:00:09.2 setup! uhci_hcd 0000:00:09.2: init 0000:00:09.2 fail, -19 Running 0dns-down to make sure resolv.conf is ok...done. Setting up networking...done. Starting hotplug subsystem: pci uhci-hcd: already loaded wait source ready timeout 0x1410 [0x8c8c8c8c] <- repeated 180 times AC'97 0 analog subsections not ready wait source ready timeout 0x1410 [0x8c8c8c8c] <- repeated 453 times snd-ens1371: loaded successfully pci [success] usb usb [success] isapnp isapnp [success] ide ide [success] input input [success] scsi scsi [success] done. Setting up IP spoofing protection: rp_filter. Configuring network interfaces...done. Starting portmap daemon: portmap.
-- Martin Michlmayr http://www.cyrius.com/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |