lkml.org 
[lkml]   [2005]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2.6.13] libata: Marvell SATA support (PIO mode)

> Brett Russ wrote:
>
>> Some (non-functional) cleanup modifications since the version 0.10
>> driver I sent out 2005-08-30. Also adding signed-off-by for Jeff's
>> upstream push. This is my libata compatible low level driver for
>> the Marvell SATA family. Currently it successfully runs in PIO mode
>> on a 6081 chip. EDMA support is in the works and should be done
>> shortly. Review, testing (especially on other flavors of Marvell),
>> comments welcome.
>>
>> Thank you,
>> BR
>>
>> Signed-off-by: Brett Russ <russb@emc.com>
>>
> [snip..]
>
> Please find attached patches that add the Adaptec 1420SA controller to
> the PCI ID list in the driver, and a small note in the kernel config
> option to state so. This is untested as of currently, if anyone has a
> 1420SA to try, that would be great.. The one I had access to is now
> gone to a remote location out of reach for testing. I read in one
> post I found with google, that the 1420SA uses a 6541 chip instead of
> a 6041, but I am not able to verify this, and also don't know if it
> may still work as a 6041. The card is still a Sata2, PCI-X card, with
> 4 ports, the same as the 6041 based cards. This patch may or may not
> be useful.. The card comes with a manufacturer ID of 9005 according
> to a linux PCI-ID list, which is a secondary id of Adaptec's known as
> ADAPTEC2, and an actual PCI Id of 0241.
>
> Signed-off-by: Tyler Guthrie <pml@dtbb.net>
>
>
> --- linux-2.6.13.orig/drivers/scsi/Kconfig 2005-09-03
> 06:42:20.000000000 -0700
> +++ linux-2.6.13drivers/scsi/Kconfig 2005-09-03 06:44:29.000000000
> -0700
> @@ -466,6 +466,8 @@
> This option enables support for the Marvell Serial ATA family.
> Currently supports 88SX[56]0[48][01] chips.
>
> + Also Including Adaptec 1420SA Card (using marvell chip
> pci-id 0x0241).
> +
> If unsure, say N.
>
> config SCSI_SATA_NV
>
> --- linux-2.6.13.orig/drivers/scsi/sata_mv.c 2005-09-03
> 06:40:07.000000000 -0700
> +++ linux-2.6.13/drivers/scsi/sata_mv.c 2005-09-03
> 06:39:47.000000000 -0700
> @@ -286,6 +286,7 @@
> {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6041), 0, 0, chip_604x},
> {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6080), 0, 0, chip_608x},
> {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6081), 0, 0, chip_608x},
> + {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, 0x0241), 0, 0, chip_604x},
> {} /* terminate list */
> };
>
>
>
> Tyler.
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
-------- Original Message --------
From: - Sun Sep 25 07:30:35 2005
Return-Path: <dekien@pandora.be>
Delivered-To: 1-pml@dtbb.net
(Postfix) with ESMTP id 0C44938138 for <pml@dtbb.net>; Sun, 25 Sep
2005 16:25:31 +0200 (CEST)
Message-ID: <4336B356.3020600@pandora.be>
Date: Sun, 25 Sep 2005 16:25:26 +0200
From: Jeroen <dekien@pandora.be>
To: pml@dtbb.net
Subject: Re: [PATCH 2.6.13] libata: Marvell SATA support (PIO mode)
X-Antivirus: AVG for E-mail 7.0.344 [267.11.6]

Hi,

I have just tested you patch and i can confirm that is work with the
adaptec 1420SA. If u would like any further information feel free to
contact me.

thanks

Jeroen



--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.7/112 - Release Date: 9/26/2005

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-09-27 07:39    [W:0.156 / U:2.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site